English version |
Güllü Kızıltaş ŞendurE-posta : gullu.kiziltas sabanciuniv.edu Kişisel web sayfası  Eğitim :
Michigan Üniversitesi, Ann Arbor, MI, ABD, Makina Mühendisliği Doktorası (Ağustos 2003) Orta Doğu Teknik Üniversitesi, Ankara, Türkiye, Mastır ve Lisans Eğitimi, Makina Mühendisliği (1995, 1998) Çalıştığı Kuruluşlar :
Yardımcı Doçent (Eylül 2005-) Sabancı Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Istanbul, Türkiye Doktora sonrası araştırmacı (Mayıs 2003-Ağustos 2005), Michigan Üniversitesi, Elektrik ve Elektronik ve Bilgisayar Bilimi Bölümü, Radiation Laboratuvaru, Ann Arbor, MI, ABD Uzman Araştırmacı (Mayıs 2003-Ağustos 2005) Ohio State Üniversitesi, Elektronik ve Bilgisayar Mühendisliği Bölümü, ElectroScience Laboratory, Columbus, OH, ABD Yüksek Lisans Araştırma Asistanı (Eylül 1998? Mayıs 2003) Michigan Üniversitesi, Makina Mühendisliği Bölümü, Hesaplamalı Mekanik Laboratuvarı, Ann Arbor, MI, ABD Araştırma Alanları :
Tasarım Optimizasyonu (mekanik, biomedikal ve elektromanyetik sistemlerin tasarımı, karmaşık/yeni teknoloji ürünlerin optimal tasarımı, çok-disiplinli sistem tasarımı)
Malzeme Tasarımı ve Üretimi (Topoloji optimizasyonu, homojenleştirme teorisi, üç boyutlu ileri malzeme üretim teknikleri (katı serbest şekil üretimi, ko-extrüzyon ile mikro-fabrikayson)
Hesaplamalı Mekanik (ileri mikro malzeme modelleme, sonlu elemanlar yöntemi)
Elektromanyetizma (Sonlu elemanlar yöntemi, minyatür çok amaçlı antenler, filtreler ve pasif aygıtlar, faz dizilimli antenler)Ödüller :
- 2008 Graduating Class Teaching Award - Sabanci University 2008
- TUBA-GEBIP (2008 Yound Scientist Award) - Turkish Academy of Sciences 2008
Üyelikler :
IEEE, ASME, ACerSYayınlar :
Article |
Alipour Ghassabi, Ata and Razgordanisharahi, Ali and Kızıltaş, Güllü and Kiani, Yaser and Hellmich, Christian (2024) "An exact analytical method for free vibration analysis of FG-GPLRC sector cylindrical shells under Levy-type boundary conditions". Published Online First https://dx.doi.org/10.1007/s00707-024-04072-0 |
Ozdilek, Emin Emre and Özçakar, Egecan and Muhtaroglu, Nitel and Simsek, Ugur and Gulcan, Orhan and Kızıltaş, Güllü (2024) "A finite element based homogenization code in python: HomPy", Advances in Engineering Software, Vol.194 (SCI) |
Alan, Salih and Shaban, Nefize and Kızıltaş, Güllü and Bediz, Bekir (2024) "Concurrent stacking sequence and layout optimization of stiffened composite plates using a spectral element method and an index-based optimization technique", Composite Structures, Vol.327 (SCI) |
Aydın, Mehmet Serhat and Şahin, Mervenaz and Doğan, Zeynep and Kızıltaş, Güllü (2023) "Microstructural characterization of PCL-HA bone scaffolds based on
nonsolvent-induced phase separation", ACS Omega, Vol.8, No.50, 47595-47605 (SCI) |
Parlayan, Onur and Ozdemir, Mirhan and Gayir, Cemal Efe and Simsek, Ugur and Kızıltaş, Güllü (2023) "A new sensitivity-based mapping scheme for topology optimization of graded TPMS designs", International Journal of Advanced Manufacturing Technology, Vol.129, 3197-3220 (SCI) |
Ozdemir, Mirhan and Simsek, Ugur and Kızıltaş, Güllü and Gayir, Cemal Efe and Celik, Alican and Sendur, Polat (2023) "A novel design framework for generating functionally graded multi-morphology lattices via hybrid optimization and blending methods", Additive Manufacturing, Vol.70 (SCI) |
Özçakar, Egecan and Şimşek, Uğur and Kızıltaş, Güllü (2021) "Ordered multi-material SIMP approach applied to 3D topology optimization", Journal of Additive Manufacturing Technologies, Vol.1, No.2 (NA) |
Şimşek, Uğur and Gayir, Cemal Efe and Kızıltaş, Güllü and Şendur, Polat (2020) "An integrated homogenization-based topology optimization via RBF mapping strategies for additively manufactured FGLS and its application to bandgap structures", International Journal of Advanced Manufacturing Technology, Vol.111, No.5-6, 1361-1374 (SCI) |
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan (2019) "A systematic design selection methodology for system-optimal compliant actuation", Robotica, Vol.37, No.4, 656-674 (SCI) |
Berkün, Işıl and Kızıltaş, Güllü (2018) "Optimization of dry powder deposition parameters for production of large substrates using functionally graded ceramics", International Journal of Applied Ceramic Tecnology, Vol.15, No.5, 1199-1211 (SCI) |
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan (2017) "Co-design strategies for optimal variable stiffness actuation", IEEE/ASME Transactions on Mechatronics, Vol.22, No.6, 2768-2779 (SCI) |
Yılmaz, Ayça and Helvacıoğlu-Yiğit, Dilek and Gür, Cansu and Ersev, Handan and Kızıltaş, Güllü and Avcu, Egemen and Baydemir, Canan and Abbott, Paul Vincent (2017) "Evaluation of dentin defect formation during retreatment with hand and rotary instruments: a micro-CT study", Scanning (SCI) |
Tansık, Gülistan and Kılıç, Erden and Beter, Mustafa and Demiralp, Bahtiyar and Kızıltaş, Güllü and Can, Nuray and Özkan, Hüseyin and Ergül, Elif and Güler, Mustafa O. and Tekinay, Ayşe B. (2016) "A glycosaminoglycan mimetic peptide nanofiber gel as an osteoinductive scaffold", Biomaterials Science, Vol.4, No.9, 1328-1339 (SCI) |
Sarıdağ, Serkan and Helvacıoğlu-Yiğit, Dilek and Özcan, Mutlu and Avcu, Egemen and Kızıltaş, Güllü (2016) "Micro-computerized tomography analysis of cement voids and pull-out strength of glass fiber posts luted with self-adhesive and glass-ionomer cements in the root canal", Journal of Adhesion Science and Technology, Vol.30, No.14, 1585-1595 (SCI) |
Helvacıoğlu-Yiğit, D. and Yılmaz, A. and Kızıltaş-Şendur, Güllü and Aslan, Onur Şevket and Abbott, P. V. (2014) "Efficacy of reciprocating and rotary systems for removing root filling material: a micro-computed tomography study", Scanning, Vol.36, No.6, 576-581 (SCI) |
El-Kahlout, Yasser and Kızıltaş, Güllü (2011) "Effective interpolation scheme for multi-resonant antenna responses: generalised Stoer-Bulirsch algorithm with adaptive sampling", IET Microwaves, Antennas & Propagation, Vol.5, No.15, 1849-1856 (SCI) |
El-Kahlout, Yasser and Kızıltaş, Güllü (2011) "Rational interpolation scheme based on Bayesian classifiers for multi-resonance response of radio frequency devices", IET Microwaves, Antennas & Propagation, Vol.5, No.5, 576-582 (SCI) |
El-Kahlout, Yasser and Kızıltaş, Güllü (2011) "Inverse synthesis of electromagnetic materials using homogenization based topology optimization", Progress in Electromagnetics Research-Pier, Vol.115, 343-380 (SCI) |
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet (2011) "Design and control of the humanoid robot SURALP", Turkish Journal of Electrical Engineering and Computer Sciences, Vol.19, No.5, 725-731 (SCI) |
Maşazade, Engin and Rajagopalan, Ramesh and Varshney, Pramod K. and Mohan, Chilukuri K. and Kızıltaş, Güllü and Keskinöz, Mehmet (2010) "A multiobjective optimization approach to obtain decision thresholds for distributed detection in wireless sensor networks", IEEE Transactions on Systems Man and Cybernetics, Part B: Cybernetics, Vol.40, No.2, 444-457 (SCI) |
Öğüt, Erdem and Kızıltaş, Güllü and Şendur, Kürşat (2010) "Circularly polarized localized near-field radiation at the nanoscale", Applied Physics B: Lasers and Optics, Vol.99, No.1-2, 67-74 (SCI) |
Koulouridis, Stavros and Kızıltaş, Güllü and Zhou, Yijun and Hansford, Derek J. and Volakis, John L. (2006) "Polymer-ceramic composites for microwave applications: fabrication and performance assessment", IEEE transactions on microwave theory and techniques, Vol.54, No.12, 4202-4208 (NA) |
Zhou, Yijun and Koulouridis, Stavros and Kızıltaş, Güllü and Volakis, John L. (2006) "A novel 1.5 '' quadruple antenna for tri-band GPS applications", IEEE Antennas and Wireless Propagation Letters, Vol.5, No.1, 224-227 (SCI) |
Volakis, John L. and Mumcu, G. and Sertel, K. and Chen, C. C. and Lee, M. and Kramer, B. and Psychoudakis, D. and Kızıltaş, Güllü (2006) "Antenna miniaturization using magnetic photonic and degenerate band edge crystals", IEEE Antennas and Propagation Magazine, Vol.48, No.5, 12-28 (SCI) |
Book Section / Chapter |
Kızıltaş, Güllü and Papila, Melih and Yılmaz, Bengisu and Bilge, Kaan, "Challenges in micro-CT characterization of composites", Micro-Computed Tomography (Micro-CT) in Medicine and Engineering, Orhan, Kaan (ed.), Switzerland: Springer, Cham, July 2019, 225-246 |
Çakmakçı, Melih and Kızıltaş, Güllü and Durak, Umut, "Simulation-based engineering", Guide to Simulation-Based Disciplines: Advancing Our Computational Future, Mittal, Saurabh and Durak, Umut and Ören, Tuncer (eds.), NY, USA: Springer International Publishing, July 2017 |
Papers in Conference Proceedings |
Açar, Eren and Şimşek, Uğur and Gökçay, Barış and Kızıltaş, Güllü, "An inverse synthesis method for the determination of effective mechanical properties for additively manufactured aperiodic structures with finite thickness", 10th International Conference on Recent Advances in Air and Space Technologies (RAST), Institute of Electrical and Electronics Engineers, June 2023 |
Alipour Ghassabi, Ata and Kızıltaş, Güllü, "Microstructure effect on bone formation of a functionally graded scaffold using a mechanostat-based model", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 673-673 |
Öztürk, Sezen and Alipour Ghassabi, Ata and Kızıltaş, Güllü, "Effect of 3d scaffold morphology on bone tissue regeneration based on a multi-physics fem model", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 674-674 |
Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü and Alipour Ghassabi, Ata, "Mesenchymal stem cell diffusion integrated mechano- biology analysis of 3d scaffolds", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 1391-1391 |
Erülker, Ece Naz and Ece, Tuğhan and Ekicioğlu, Ayşe and Can, Faruk and Kızıltaş, Güllü and Özaydın İnce, Gözde, "Simulation based design and fabrication of a PPy coated PDMS based pressure sensor", Kuralay, Filiz and Çırpan, Ali and Bek, Alpan (eds.), 16th Nanoscience and Nanotechnology Conference, Middle East Technical University, September 2022, 220-220 |
Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü, "Analysis of functionally graded and uniform scaffolds based on mechano-biology and cell diffusion", VPH 2022 Conference (Virtual Physiological Human): Digital Twins for Personalized Treatment Development and Clinical Trials, Virtual Physiological Human, September 2022, 44-44 |
Özçakar, Egecan and Sayginer, Osman and Kızıltaş, Güllü, "Design of a wearable microwave antenna system for breast tumor imaging", International Applied Computational Electromagnetics Society Symposium (ACES), Institute of Electrical and Electronics Engineers, August 2021 |
Şimşek, Uğur and Gayir, Cemal Efe and Parlayan, Onur and Kızıltaş, Güllü, "Design of graded TPMS with performance preserving density mapping strategy based on adjoint sensitivities", 4th International Conference on Building Materials and Materials Engineering (ICBMM 2020), Materials Science Forum, August 2021 |
Aydın, Mehmet Serhat and Bilgili, Hatice Kübra and Kızıltaş, Güllü and Emanet, Melis and Özaydın İnce, Gözde, "Fabrication and analysis of surface functionalized porous pcl-nha scaffolds with p(hema-co-egdma) hydrogel via icvd and bmp-2 release simulation", ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), ASME (American Society of Mechanical Engineers), February 2021 |
Bilgili, Hatice Kübra and Özaydın İnce, Gözde and Emanet, Melis and Kızıltaş, Güllü, "Fabrication of 3D bone scaffolds functionalized with spatiotemporal release of BMP-2 growth factor via iCVD to enhance osteoregeneration", ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), ASME (American Society of Mechanical Engineers), February 2021 |
Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü, "Initial study towards the integrated design of bone scaffolds based on cell diffusion, growth factor release and tissue regeneration", International Mechanical Engineering Congress & Exposition, ASME Digital Collection, February 2021 |
Aydın, Mehmet Serhat and Kızıltaş, Güllü and Kuloğlu, Büşra, "Fabrication of composite bone scaffolds with controlled multi-scale porosity using non-solvent induced phase separation based 3D printing", Materials Research Society Fall 2018 Meetings, MRS (Materials Research Society), November 2018 |
Aydın, Mehmet Serhat and Kuloğlu, Büşra and Sipahi, Çağla and Çayır, Berkay and Kızıltaş, Güllü, "Integrated design scheme based on mechano-biology and level set based topology optimization for bone scaffolds", Materials Research Society Fall 2018 Meetings, MRS (Materials Research Society), November 2018 |
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan, "A systematic analysis of spring symmetry on optimality of antagonistic variable stiffness actuation", Bicchi, A. and Okamura, A. (eds.), IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2017), USA: IEEE (Institute of Electrical and Electronics Engineers), December 2017, 5687-5693 |
Saygıner, Osman and Kızıltaş, Güllü, "Integrated topology optimization of volumetric antenna substrates and conductor surfaces for broadband microstrip patch antennas", IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, USA: IEEE (Institute of Electrical and Electronics Engineers), July 2017 |
Saygıner, Osman and Kızıltaş, Güllü, "Fabrication of functionally graded ceramic- polymer dielectrics via freeze casting for RF applications", IEEE AP-S Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, USA: IEEE (Institute of Electrical and Electronics Engineers), July 2017 |
Yılmaz, A. and Helvacıoğlu-Yiğit, D. and Gür, C. and Ersev, H. and Kızıltaş, Güllü and Avcu, E. and Baydemir, C. and Abbott, P. V., "European Society of Endodontology: Abstracts from the Biennial Congress 2015 (Micro-CT evaluation of dentine defect formation during re-treatment with hand and
rotary instruments)", 17th Biennial European Society of Endodontology Congress, 0143-2885 (Print) 1365-2591 (Online): Wiley, January 2016, 114-114 |
Kızıltaş, Güllü, "Design of artifical metmaterials with desired multi-physical properties using topology optimization", USNC-URSI Radio Science Meeting (Joint with AP-S Symposium 2015), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2015, 106-106 |
Kızıltaş, Güllü, "Micro-CT and pull-out bond strength analysis of different fiber posts and different self-adhesive luting cements", 22. International Congress of the Turkish Prosthodontics and Implantology Association, Antalya: Turkish Prosthodontics and Implantology Association 2015 |
Sarıdağ, Serkan and Helvacıoğlu Yiğit, Dilek and Avcu, Egemen and Kızıltaş, Güllü and Özcan, Mutlu, "Pull-out strength of different diameter fiber reinforced posts to different type self-adhesive luting cements (Farklı çapta fiber postların farklı tipte self adeziv simanlar ile bağlanma dayanımları)", 21. TDA International Dental Congress, Istanbul, Turkey: Turkish Dental Association 2015 |
Kamadan, Abdullah and Kızıltaş, Güllü and Patoğlu, Volkan, "Değişken esneklikte eyleme için optimal ortak-tasarım stratejileri", Türkiye Otonom Robotlar Konferansı (TORK 2014), Ankara, Türkiye: ODTÜ (Ortadoğu Teknik Üniversitesi), November 2014 |
Eskin, Murat Gökhan and Yiğit, Hüseyin and Kızıltaş, Güllü, "Topology optimization based inverse synthesis of spectral 3D metamaterials", IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, USA: IEEE (Institute of Electrical and Electronics Engineers), July 2014, 83-83 |
Aslan, Onur Şevket and Kızıltaş, Güllü, "Computational design of tissue scaffolds for cartilage repair via the level-set method", 11th World Congress of the International Cartilage Repair Society (ICRS 2013), ICRS Library: International Cartilage Repair Society, September 2013 |
Eskin, Murat Gökhan and Kızıltaş, Güllü, "Design of 'lossy' metamaterials using inverse topology optimization", IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (AP-S/USNC-URSI 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2013 |
İnce, Fatma Gül and Kızıltaş, Güllü, "A new fabrication technique for the development of flexible mosaic substrates for conformal RF devices", IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (AP-S/USNC-URSI 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2013 |
Yiğit, Hüseyin and Kızıltaş, Güllü, "Level-set based topology optimization of MM-Wave large aperture lens designs", IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting (AP-S/USNC-URSI 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2013 |
Aslan, Onur Şevket and Kızıltaş, Güllü, "Computational design of tissue scaffolds via the level-set method", Tissue Engineering and Regenerative Medicine International Society (TERMIS-EU 2013), San Ramon, CA, USA: Tissue Engineering International and Regenerative Medicine Society, June 2013 |
Başaran, Necdet and Kızıltaş, Güllü, "Fabrication of polymer-ceramic composite bone scaffolds with controlled multi-scale porosity", Hoboken, NJ, USA: Wiley-Blackwell, September 2012, 35-35 |
Kızıltaş, Güllü and Başaran, Necdet, "Level set based design optimization framework for active scaffolds", Hoboken, NJ, USA: Wiley-Blackwell, September 2012, 392-392 |
Doğan, Mustafa and Kızıltaş, Güllü and Üstüner, Fatih, "Optimization of aperture coupled microstrip patch antennas", Progress In Electromagnetics Research Symposium, Cambridge, USA: The Electromagnetics Academy, September 2010, 657-660 |
Öğüt, Erdem and Kızıltaş, Güllü and Şendur, Kürşat, "Obtaining circularly polarized optical spots beyond the diffraction limit using plasmonic nano-antennas", Govorov, A. O. and Rogach, A. L. and Wang, Z. M. and Wang, J. K. and Shalaev, V. M. (eds.), 2009 MRS Fall Meeting, Warrendale, PA, USA: Materials Research Society, February 2010 |
Taşdemir, Zuhal and Kızıltaş, Güllü, "Flexible ceramic polymer composite substrates with spatially variable dielectrics for miniaturized RF applications", Sanvito, S. and Heinonen, O. and Dediu, V. A. and Rizzo, N. (eds.), Symposium on Novel Materials and Devices for Spintronics, Warrendale, PA, USA: Material Research Society 2010, 145-150 |
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet, "SURALP: a new full-body humanoid robot platform", IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2009), USA: IEEE (Institute of Electrical and Electronics Engineers), October 2009, 4949-4954 |
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Yılmaz, Metin and Ünel, Mustafa and Kızıltaş, Güllü and Şabanoviç, Asif and Onat, Ahmet, "İnsansı robot platformu SURALP", Erbatur, Kemalettin (ed.), Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye: Yıldız Teknik Üniversitesi, October 2009 |
Öğüt, Erdem and Kızıltaş, Güllü and Şendur, Kürşat, "Circularly polarized localized near-field radiation at the nanoscale", 22nd Annual Meeting of the IEEE-Photonics-Society, Piscataway, New Jersey, USA: IEEE Photonics Society, October 2009, 160-161 |
Berkün, Işıl and Kızıltaş, Güllü and Şendur, Kürşat, "A multiobjective optimization framework for nano-antennas via normal boundary intersection (NBI) method", IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting 2009, USA: IEEE (Institute of Electrical and Electronics Engineers), June 2009 |
El-Kahlout, Yasser and Kızıltaş, Güllü, "Optimally designed microstructures of electromagnetic materials via inverse homogenization", IEEE Antennas and Propagation Society International Symposium, 2009 (APSURSI '09), USA: IEEE (Institute of Electrical and Electronics Engineers), June 2009, 1-4 |
Kızıltaş, Güllü and El-Kahlout, Yasser, "Systematic synthesis framework for novel electromagnetic materials", 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-08), Daejeon, Korea: ISSMO (International Society for Structural and Multidisciplinary Optimization), June 2009 |
Taşdemir, Zuhal and Kızıltaş, Güllü, "Flexible ceramic-polymer composite substrates for miniaturized RF applications via tape casting", IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting 2009, USA: IEEE (Institute of Electrical and Electronics Engineers), June 2009 |
Erbatur, Kemalettin and Seven, Utku and Taşkıran, Evrim and Koca, Özer and Kızıltaş, Güllü and Ünel, Mustafa and Şabanoviç, Asif and Onat, Ahmet, "SURALP-L – İnsansı robot platformu bacak modülü", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008 |
Karabaşoğlu, Orkun and Kızıltaş, Güllü, "Comparative analysis of approximation methods in electromagnetic design", 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada: AIAA, September 2008 |
Şendur, Kürşat and Karabaşoğlu, Orkun and Baran, Eray Abdurrahman and Kızıltaş, Güllü, "Optimization of plasmonic nano-antennas", Kawata, Satoshi (ed.), MRS Conference, Warrandale, Pennsylvania, USA: Material Research Society, August 2008 |
El-Kahlout, Yasser and Kızıltaş, Güllü, "Global design optimization of complex electromagnetic devices via efficient
frequency response interpolations", 2008 IEEE International Symposium on Antennas and Propagation, USA: IEEE, July 2008 |
Ünal, Ramazan and Kızıltaş, Güllü and Patoğlu, Volkan, "Multi-criteria design optimization of parallel robots", IEEE International Conference on Cybernetics and Intelligent Systems and IEEE International Conference on Robotics, Automation and Mechatronics, CIS -RAM 2008, USA: IEEE (Institute of Electrical and Electronics Engineers) 2008, 577-583 |
Ünal, Ramazan and Kızıltaş, Güllü and Patoğlu, Volkan, "A multi-criteria design optimization framework for haptic interfaces", IEEE Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, Haptics Symposium 2008, USA: IEEE 2008, 231-238 |
Ünal, Ramazan and Patoğlu, Volkan and Kızıltaş, Güllü, "Rehabilitasyon robotunun empedans kontrole göre tasarım optimizasyonu", TOK'07 Otomatik Kontrol Ulusal Toplantısı, İstanbul, Türkiye: Otomatik Kontrol Türk Milli Komitesi, September 2007, 134-139 |
El-Kahlout, Yasser and Kızıltaş, Güllü, "Bayesian trained rational functions for electromagnetic design optimization", 2007 IEEE AP-S International Symposium, Piscataway, USA: IEEE 2007 |
El-Kahlout, Yasser and Kızıltaş, Güllü, "An Efficient optimization framework for material and conductor designs of antennas", International Conference on Electromagnetics in Advanced Applications, ICEAA'07, Piscataway, USA: IEEE 2007 |
Karabaşoğlu, Orkun and Kızıltaş, Güllü, "Design optimization of artificial magneto-dielectrics for RF applications", Metanaterials'2007: First International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, Rome, Italy: EU 6th Framework Metamorhose Network of Excellence 2007 |
Nergiz, Zeynep Saide and Kızıltaş, Güllü, "Optimization of dry powder deposition parameters for the production of dielectric and magneto-dielectric composites", Materials Science & Technology 2007 Conference and Exhibit, Westerville, Ohio, USA: American Ceramics Society 2007 |
Volakis, John L. and Kızıltaş, Güllü, "Novel materials for RF devices", 2007 IEEE AP-S International Symposium, Piscataway, USA: IEEE 2007 |
Kızıltaş, Güllü, "Concurrent design of conductor shape and artificial material composites for RF applications", 2006 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science AMEREM Meetings, Albuquerque, USA: IEEE, July 2006 |
Kızıltaş, Güllü, "Design and fabrication of three dimensional dielectric and magnetic composites for Satcom antenna applications", IEEE Antennas and Propagation Society International Symposium 2006, Albuquerque, USA: IEEE, July 2006, 2265-2268 |
Kızıltaş, Güllü and Wing, Zach N., "Automated fabrication of three dimensional dielectric composites for RF applications", IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science 2006, Albuquerque, USA: IEEE, July 2006 |
Kızıltaş, Güllü, "Topology optimization and fabrication of multi-material dielectrics for antenna performance improvements", III European Conference on Computational Solid and Structural Mechanics,, June 2006 |
Working Paper / Technical Report |
Nergiz, Zeynep Saide and Kızıltaş, Güllü, "Dry powder deposition for fabrication of electromagnetic devices using textured dielectric and magnetic ceramics", December 2007, Sabancı University ID:SU_FENS_2007/0022 |
Ünal, Ramazan and Kızıltaş, Güllü and Patoğlu, Volkan, "A Multi-criteria design optimization framework for haptic interfaces", September 2007, Sabancı University ID:SU_FENS_2007/0014 | SU Öncesi Yayınları:
Zhou, Y., Koulouridis, S., Kiziltas G., .Volakis, J.L. (2006) A Novel 1.5” Quadruple Antenna for Tri-Band GPS Applications. AWPL 5, Nr: 1, 224-227.
Volakis, J. L., Mumcu, G., Sertel, K., Chen, C.-C., Lee, M., Kramer, B., Psychoudakis, D., Kiziltas, G. (2006) Antenna Miniaturization using Magnetic Photonic and Degenerate Band Edge Crystals. IEEE AP Magazine 48, 5, 12-28.
Koh, Y., Halloran, J. W., Kiziltas, G., Psychoudakis, D., Volakis, J.L. (2005) Thermoplastic Green Machining for Textured Dielectric Substrate for Broadband Miniature Antenna. J. of Am. Cer. Soc. 88, 2, 297-302.
Kiziltas, G., Volakis, J.L., Kikuchi, N. (2005) Design of a frequency selective structure with inhomogeneous substrates as a thermo-photovoltaic filter. IEEE Trans. on AP, 53, 7, 2282-2289.
Kiziltas, G., Kikuchi, N., Volakis, J.L., Halloran, J. (2004) Dielectric material optimization for electromagnetic applications using SIMP. Archives of Comp. Methods in Eng. 11, 4, 2004, 355-388.
Kiziltas, G., Psychoudakis D., Volakis, J. L., Kikuchi, N. (2003) Topology design optimization of dielectric substrates for bandwidth improvement of a patch antenna. IEEE Trans. on AP 51, 10, 2732 – 2743.
35 Refereed Conference Papers |