Mahmut Faruk Akşit
E-posta : mahmut.aksit
sabanciuniv.edu
Eğitim :
Diplomalar:
1998 Doktora, Makine Mühendisliği, Rensselaer Polytechnic Institute, Troy, NY, Tez: A Computational Study of Brush Seal Contact Loads with Friction. Tez Danışmanı: Prof. Dr. John A. Tichy
1993 Yüksek Lisans, Makine Mühendisliği, Rensselaer Polytechnic Institute, Troy, NY, Thesis: Lumped Parameter Analysis of Powder Injection Molding Tez Danışmanı: Prof. Dr. Daeyong Lee
1991 Lisans, Makine Mühendisliği, Boğaziçi Üniversitesi, İstanbul, Türkiye, Mezuniyet Tezi: Effects of Processing Parameters on the Tensile Properties of Injection Molded Polypropylene and High Density Polyethylene Tez Danışman: Prof. Dr. Sabri Altıntaş
Meslek İçi Eğitim:
2000 e-Matrix Web Based Engineering and Product Data Management, Matrix One Inc.,
1999 DFSS Generation III Tools, General Electric Corporate R&D,
1999 Fluid Sealing Technology, Georgia Institute of Technology,
1999 Technical Writing, Thornton Communications Inc.,
1999 Project Leadership, PCI Global Inc.,
1999 Effective Presentation, General Electric Power Systems,
1998 DFSS Training, General Electric Corporate R&D,
1998 Interviewer Training Program, General Electric Corporate R&D,
1996 Turbine University, General Electric Power Systems,
Çalıştığı Kuruluşlar :
2015- Prof.Dr. Sabancı Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi,
2004-2015 Doç.Dr. Sabancı Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi / Mekatronik
2002-2003 Başkan Yardımcısı ve Yönetim Kurulu Üyesi, Kazak-Türk Yenilenebilir Enerji Kaynakları Araştırma Merkezi
2001-2003 Enerji Sistemleri Bölüm Başkanı, Y. Doç.Dr., Gebze Yüksek Teknoloji Enstitüsü, Mühendislik Fakültesi
1998-2001 Proje Yöneticis & Advanced Seals Araştırma Ekibi Başkanı, Engineering Mechanics Laboratory, General Electric R&D Center
1992-1998 Sözleşmeli Araştırmacı (Contract Research Engineer), Engineering Mechanics Laboratory, General Electric R&D Center
1991-1998 Araştırma Görevlisi, Mechanical, Aerospace, & Nuclear Engineering, Rensselaer Polytechnic Institute, USA
Ödüller :
- Elected to Vice President of ASME Turkey Executive Committee - ASME International 2009
- Graduating Class Award - Sabanci University 2009
- Elected to ASME Turkey Executive Committee - ASME International 2007
- Elected to Executive Board of Directors for Turkish Electric Power Generation Company (EUAS) - Turkish Electric Power Generation Company (EUAS) 2007
- Elected to ASME International Gas Turbine Institute Heat Transfer Technical Committee - ASME 2006
- Graduating Class Ödülü sıralamasında 3.cü oldu - Sabanci University 2006
- Became Associate Professor - YÖK 2004
- Elected to International Advisory Board of World Tribology Congress by ASME and STLE - ASME and STLE 2004
Yayınlar :
| Article |
| Pehlivan, Ahmet Selim and Akşit, Mahmut Faruk and Erbatur, Kemalettin (2021) "Fatigue analysis design approach, manufacturing and implementation of a 500 kW wind turbine main load frame", Energies, Vol.14, No.12 (SCI) |
| Görgün, Erdem and Doğu, Yahya and Akşit, Mahmut Faruk (2020) "Investigation of flow behavior and porous medium resistance coefficients for metallic-cloth fibers", Fibers, Vol.8, No.12 (ESCI) |
| Görgün, Erdem and Akşit, Mahmut Faruk and Doğu, Yahya (2020) "A study of cloth seal leakage performance based on geometry and pressure load", Energies, Vol.13, No.22 (SCI) |
| Kaya, Alaattin Metin and Kandemir, İlyas and Akşit, Mahmut Faruk and Yiğit, K. Süleyman (2015) "Investigation of optimum working conditions of a micro cross flow turbine". Published Online First http://dx.doi.org/10.1002/ep.12112 |
| Aksoy, Serdar and Akşit, Mahmut Faruk (2015) "A fully coupled 3D thermo-elastohydrodynamics model for a bump-type compliant foil journal bearing", Tribology International, Vol.82, No.Part: , 110-122 (SCI) |
| Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk (2013) "Modeling and control of a variable speed variable pitch angle prototype wind turbine", Mathematical and Computational Applications, Vol.18, No.3, 408-420 () |
| Çetinsoy, Ertuğrul and Dikyar, Serhat and Hançer, Cevdet and Öner, Kaan Taha and Sırımoğlu, Efe and Ünel, Mustafa and Akşit, Mahmut Faruk (2012) "Design and construction of a novel quad tilt-wing UAV", Mechatronics (Sl), Vol.22, No.6, 723-745 (SCI) |
| Coşkun, Mustafa Bulut and Aksoy, Serdar and Akşit, Mahmut Faruk (2012) "Friction and wear characteristics of Haynes 25, 188, and 214 superalloys against Hastelloy X up to 540 °C", Tribology Letters, Vol.45, No.3, 497-503 (SCI) |
| Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Gülez, Kayhan and Kandemir, İlyas (2012) "Mathematical modeling and vertical flight control of a tilt-wing UAV", Turkish Journal of Electrical Engineering & Computer Sciences, Vol.20, No.1, 149-157 (SCI) |
| Akşit, Mahmut Faruk (2011) "Wind turbine manufacturing infrastructure in Turkey", The Energy Report, Vol.2, No.15, 36-43 (NA) |
| Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan (2011) "Design and development of a tilt-wing UAV", Turkish Journal of Electrical Engineering and Computer Sciences, Vol.19, No.5, 733-741 (SCI) |
| Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpiççi, Hüsnü (2010) "Effect of R600a on tribological behavior of sintered steel under starved lubrication", Tribology International (Sp. Iss. SI), Vol.43, No.5-6, 1054-1058 (SCI) |
| Akşit, Mahmut Faruk (2010) "Seeking design solutions through decoupling problems – a global engineering example", ME Today: A Publication for Early Career Engineers, Vol.11 (NA) |
| Doğu, Yahya and Akşit, Mahmut Faruk (2006) "Brush seal temperature distribution analysis", ASME Journal of Engineering for Gas Turbines and Power, Vol.128, No.3, 599-609 (SCI) |
| Doğu, Yahya and Akşit, Mahmut Faruk (2006) "Effects of geometry on brush seal pressure and flow fields - Part I: Front plate configurations", Journal of Turbomachinery, Vol.128, No.2, 367-378 (SCI) |
| Doğu, Yahya and Akşit, Mahmut Faruk (2006) "Effects of geometry on brush seal pressure and flow fields - Part II: Backing plate configurations", Journal of turbomachinery, Vol.128, No.2, 379-389 (SCI) |
| Papers in Conference Proceedings |
| Pehlivan, Selim Ahmet and Akşit, Mahmut Faruk, "Fatigue analysis approach of a 500kW wind turbine main load frame", International Conference on Renewable Energy Research and Applications (ICRERA), USA: IEEE (Institute of Electrical and Electronics Engineers), October 2013, 389-394 |
| Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk, "Modeling and control of a variable speed variable pitch angle prototype wind turbine", 4th International Conference on Mathematical and Computational Applications (ICMCA 2013), Manisa, Turkey: Association for Scientific Research, June 2013 |
| Pehlivan, Selim Ahmet and Akşit, Mahmut Faruk, "Topology optimization of a 500kW wind turbine main load frame", 4th International Conference on Power Engineering, Energy and Electrical Drives (PowerEng 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), May 2013 |
| Evren, Sanem and Ünel, Mustafa and Adak, Ömer Kemal and Erbatur, Kemalettin and Akşit, Mahmut Faruk, "Modeling and simulation of a horizontal axis wind turbine using S4WT", International Conference on Renewable Energy Research and Applications (ICRERA), USA: IEEE (Institute of Electrical and Electronics Engineers), November 2012, 1-6 |
| Akşit, Mahmut Faruk, "Evaluation of brush seals for oil sealing applications", NATO Research and Technology Organisation AVT-188 ¨Specialists Meeting on "Advanced Lubrication Systems for Gas Turbine Engines", Biarritz, France: NATO, October 2012 |
| Akşit, Mahmut Faruk, "Brush seals and common issues in brush seal applications", NATO Research and Technology Organisation AVT-188 ¨Specialists Meeting on "Advanced Lubrication Systems for Gas Turbine Engines", Biarritz, France: NATO, October 2012 |
| Evren, Sanem and Ünel, Mustafa and Adak, Ömer Kemal and Erbatur, Kemalettin and Akşit, Mahmut Faruk, "Prototip bir rüzgar türbininin S4WT ortamında modellenmesi, denetimi ve benzetimi", Otomatik Kontrol Ulusal Toplantısı 2012 (TOK'12), Niğde, Türkiye: Niğde Üniversitesi, October 2012 |
| Aksoy, Serdar and Coşkun, Mustafa Bulut and Akşit, Mahmut Faruk, "A fully coupled 3D finite element analysis for a bump-type compliant foil bearing", The ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), New York, NY, USA: ASME (The American Society of Mechanical Engineers) 2012 |
| Coşkun, Mustafa Bulut and Aksoy, Serdar and Başaran, Necdet and Akşit, Mahmut Faruk, "Friction and wear characteristics of H25, H188, H214 against Hastelloy X", The ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), New York, NY, USA: ASME (The American Society of Mechanical Engineers) 2012 |
| Akşit, Mahmut Faruk and Makaracı, Murat, "An overview of wind turbine manufacturing experience in Turkey", International 100% Renewable Energy Conference and Exhibition (IRENEC 2011), Istanbul: Marmara University, October 2011 |
| Çevik, Gülnihal and Akşit, Mahmut Faruk and Şabanoviç, Asif, "Piezoelectric wind power harnessing – an overview", 10th International Conference on Sustainable Energy Technologies (SET2011), Ankara: Atilim University, September 2011 |
| Dogan, Hassan and Akşit, Mahmut Faruk, "Aerodynamic performance sensitivity analysis of blade design for a 100 kW HAWT", 10th International Conference on Sustainable Energy Technologies (SET2011), Ankara: Atilim University, September 2011 |
| Coşkun, Mustafa Bulut and Akşit, Mahmut Faruk, "A brief overview on high temperature friction and wear", STLE/ASME International Joint Tribology Conference, 2010 (IJTC2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers) 2011, 275-278 |
| Aksoy, Serdar and Akşit, Mahmut Faruk and Doğu, Yahya, "A simple fem model for foil bearings under differential pressure", STLE/ASME International Joint Tribology Conference, 2010 (IJTC2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers), October 2010, 163-166 |
| Coşkun, Mustafa Bulut and Aksoy, Serdar and Akşit, Mahmut Faruk, "Ultra high temperature linear reciprocating tribometer", ASME/STLE International Joint Tribology Conference 2010 (JTC 2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers), October 2010 |
| Aksoy, Serdar and Akşit, Mahmut Faruk, "Evaluation of pressure-stiffness coupling in brush seals", 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Reston, VA: AIAA (The American Institute of Aeronautics and Astronautics), July 2010 |
| Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk, "Effect of shear heat on hydrodynamic lift of brush seals in oil sealing", STLE 65th STLE Annual Meeting & Exhibition, Park Ridge, IL, USA: STLE (The Society of Tribologists and Lubrication Engineers), May 2010 |
| Dal, Mehmet and Kaya, Alaattin Metin and Akşit, Mahmut Faruk and Yiğit, S. Kadri and Kandemir, İlyas and Yüksel, Ebubekir, "A hardware test setup for grid connected and island operation of micro hydro power generation systems", IEEE Energy Conference & Exhibition (ENERGYCON 2010), USA: IEEE (Institute of Electrical and Electronics Engineers) 2010 |
| Aksoy, Serdar and Akcan, Caner and Akşit, Mahmut Faruk, "Leakage performance of a novel turbomachinery shaft seal", The World Congress on Power and Energy Engineering (WCPEE 09), Cairo, Egypt: INFOMESR (The International Foundation for Modern Education and Scientific Research), October 2009 |
| Aksoy, Serdar and Akşit, Mahmut Faruk and Duran, Ertuğrul Tolga, "Brush seal performance measurement system", ASME/STLE International Joint Tribology Conference (IJTC 2009), New York, USA: ASME (American Society of Mechanical Engineers), October 2009 |
| Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Ayken, Taylan and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İ. and Gülez, K., "Yeni bir insansız hava aracının (SUAVİ) prototip üretimi ve algılayıcı-eyleyici entegrasyonu", Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye: Yıldız Teknik Üniversitesi, October 2009 |
| Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Ayken, Taylan and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İ. and Gülez, K., "Döner-kanat mekanizmasına sahip yeni bir insansız hava aracının (SUAVİ) modellenmesi ve kontrolü", Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye: Yıldız Teknik Üniversitesi, October 2009 |
| Akşit, Mahmut Faruk and Kızıl, Hüseyin and Efeoğlu, İhsan and Sariibrahimoğlu, Kemal, "Wear performance of titanium and niobium added MOS2 coatings under isobutane exposure", ASME/STLE International Joint Tribology Conference (IJTC 2009), New York, USA: ASME (American Society of Mechanical Engineers) 2009, 265-267 |
| Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpicci, Hüsnü, "Tribological behavior of sintered steel under starved lubrication in R600A environment", 2nd International Conference on Advanced Tribology, iCAT 2008, Singapore: iCAT 2008 Organising Committee, December 2008, 189-191 |
| Akşit, Mahmut Faruk, "3-D analysis of high density brush stiffness with friction-pressure coupling", VI. Türkiye Abaqus Kullanıcılar Toplantısı - TAKT 2008, İstanbul: A-Z İleri Mühendislik Ltd., November 2008, 317-322 |
| Baran, Eray Abdurrahman and Hançer, Cevdet and Çalıkoğlu, Egemen and Duman, Emre and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk, "İnsansız hava araçları için test düzeneği tasarımı ve üretimi", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008, 82-83 |
| Çetinsoy, Ertuğrul and Öner, Kaan Taha and Kandemir, İlyas and Akşit, Mahmut Faruk and Ünel, Mustafa and Gülez, Kayhan, "Yeni bir insansız hava aracının (SUAVi) mekanik ve aerodinamik tasarımı", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008, 890-896 |
| Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan, "Dynamic model and control of a new quadrotor unmanned aerial vehicle with tilt-wing mechanism", ICCARV 2008 : "International Conference on Control, Automation, Robotics and Vision", Paris, France: WASET (World Academy of Science, Engineering and Technology), November 2008, 58-63 |
| Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Kandemir, İlyas and Akşit, Mahmut Faruk and Gülez, Kayhan, "Yeni bir insansız hava aracının (SUAVi) dikey uçuş kipi için dinamik modeli ve yörünge kontrolü", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008 |
| Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Birol, Feriha S., "A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication", Farhat, Z.N. and Alfantazi, Akram (eds.), The 47th Annual Conference of Metallurgists, COM 2008, Montréal, Québec, Canada: Canadian Institute of Mining, Metallurgy and Petroleum, August 2008, 71-78 |
| Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk, "A study of brush seal oil pressure profile including temperature-viscosity effects", 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Reston, VA, USA: AIAA (American Institute of Aeronautics and Astronautics), July 2008 |
| Akcan, Caner and Akşit, Mahmut Faruk and Aksoy, Serdar and Yüksel, Ebubekir, "Response surface modeling of a small crossflow hydro turbine rotor", International Conference on Small Hydropower, Hidroenergia 2008: "On the Crossroads", Brussels, Belgium: ESHA (European Small Hydropower Association) 2008 |
| Akşit, Mahmut Faruk and Çetinsoy, Ertuğrul and Kandemir, İIyas, "A study of brush seal oil lift through long bearing analysis", STLE/ASME International Joint Tribology Conference, New York: ASME, October 2006 |
| Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk and Doğu, Yahya, "Effect of shear heat on hydrodynamic lift of brush seals in oil sealing", 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Reston, VA: AIAA, July 2006 |
| Akşit, Mahmut Faruk and Kandemir, İlyas and Doğu, Yahya and Kızıl, Hüseyin, "An investigation of pressure stiffness coupling in brush seals", Eleventh Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery, Monterey, CA: ISROMAC, February 2006 |
| Bhate, Nitin and Thermos, Anthony C. and Akşit, Mahmut Faruk and Demiroğlu, Mehmet and Kizil, Huseyin, "Non-metallic brush seals for gas turbine bearings", ASME Turbo Expo 2004:Power for Land, Sea, and Air, New York / USA: American Society of Mechanical Engineers, July 2004 |
| Yeşilyurt, Serhat and Göktuğ, Gökhan and Akşit, Mahmut Faruk, "Modeling and simulation of micro-optical switches for dynamic and static loading", IEEE Conference on Industrial Technology, ICIT 03, Maribor, SLOVENIA: IEEE, December 2003, 293-297 |
| Volumes Edited / Special Issues |
| Akşit, Mahmut Faruk, Proceedings for INGAS2007 2nd International Symposium and Exhibition on Natural Gas Operations, Istanbul: IGDAS, April 2007 |
| Akşit, Mahmut Faruk and Doğu, Yahya, INGAS2005 uluslararası doğalgaz işletmeciliği ve teknik eğitim sempozyumu bildiriler kitabı, ISTANBUL: IGDAS, November 2005 |
SU Öncesi Yayınları:
Journal Papers : "Analysis of Hydrodynamic Lift for Oil Brush Seals," Submitted to AIAA J. Prop. and Power, 2004 “Advanced Seals for Industrial Turbine Applications: Design Approach and Static Seal Development,” AIAA J. Prop. and Power, 18, 1254-1259, 2002 “Advanced Seals for Industrial Turbine Applications: Dynamic Seal Development,” AIAA J. Prop. and Power, 18, 1260-1266, 2002 “Wear of Brush Seals: Background and New Modeling Approach,” STLE Tribology Transactions, 41, 368-374, 1998 “A Lumped Parameter Analysis of Powder Injection Molding,” Int. J. Powder Metallurgy, 31, 351-363, 1995 Additionally: Published 21 Conference Papers Editted 1 Book Holds 54 Patents