Mehmet  Yıldız

Türkçe sürüm

Mehmet Yıldız

E-mail : mehmet.yildizsabanciuniv.edu

Personal web page

Education :

B.Sc.: Department of Metallurgical and Materials Engineering , Yildiz Technical University, Istanbul, Turkey, 1996 M.Sc.: Department of Metallurgical and Materials Engineering, Istanbul Technical University, Istanbul, Turkey, 2000 Ph.D.: Mechanical Engineering Department, University of Victoria, BC, Canada, 2005.

Work Experience :

Assistant Professor: Sabanci University, Faculty of Engineering and Natural Sciences, Istanbul, Turkey, 2007-present Adjunct Professor: University of Victoria, Mechanical Engineering Department, BC, Canada, 2007-present Postdoctoral Research Fellow and Course Instructor: University of Victoria, Mechanical Engineering Department, BC, Canada, 2005-2007 Welding Engineer and NDT Specialist: S&Q Mart, Istanbul, Turkey, (2000-2001) Research Engineer: Istanbul Gas Distribution Company, Istanbul, Turkey (1997-2000)

Areas of Interest :

Polymer based Composite Materials, Nano Composites, Structural Health Monitoring, Fiber Optic Sensors, Meshless Computational Fluid Mechanics (Smoothed Particle Hydrodynamics), Transport Phenomena in Materials Processing, Semiconductor Single Crystal Growth.

Publications :

Article
Alkhateab, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)
Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)
Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) "A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements", Sensors, Vol.20, No.14 (SCI)
Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) "Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave", Composite Structures, Vol.237 (SCI)
Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) "Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission", Composite Structures, Vol.230 (SCI)
Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) "Topology optimization of cracked structures using peridynamics", Continuum Mechanics and Thermodynamics (SI), Vol.31, No.6, 1645-1672 (SCI)
Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) "Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory", Composite Structures, Vol.223 (SCI)
Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) "Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning", ChemNanoMat, Vol.5, No.6, 792-801 (SCI)
Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) "A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams", Composites Part B: Engineering, Vol.167, 100-121 (SCI)
Demir, Eralp and Yousefi Louyeh, Pouya and Yıldız, Mehmet (2019) "Design of variable stiffness composite structures using lamination parameters with fiber steering constraint", Composites Part B: Engineering, Vol.165, 733-746 (SCI)
Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) "Density-based smoothed particle hydrodynamics methods for incompressible flows", Computers and Fluids, Vol.185, 22-33 (SCI)
Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) "Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis", Composite Structures, Vol.210, 381-390 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)
Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) "Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors", Thin-Walled Structures, Vol.130, 458-466 (SCI)
Rahmat, Amin and Yıldız, Mehmet (2018) "A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence", International Journal of Multiphase Flow, Vol.105, 32-44 (SCI)
Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) "Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying", ACS Omega, Vol.3, No.6, 6400-6410 (SCI)
Shojaeian, Mostafa and Nedaei, Masoumeh and Yıldız, Mehmet and Koşar, Ali (2018) "Numerical heat transfer and entropy analysis on liquid slip flows through parallel-plate microchannels", Journal of Thermal Science and Engineering Applications, Vol.10, No.2 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) "Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification", Composites Part A: Applied Science and Manufacturing, Vol.106, 1-10 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) "Efficient strategies for reliability-based design optimization of variable stiffness composite structures", Structural and Multidisciplinary Optimization, Vol.57, No.2, 689-704 (SCI)
Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) "A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading", Composite Structures, Vol.186, 347-354 (SCI)
Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)
Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)
Yılmaz, Çağatay and Yıldız, Mehmet (2017) "A study on correlating reduction in Poisson's ratio with transverse crack and delamination through acoustic emission signals", Polymer Testing, Vol.63, 47-53 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) "Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites", Composites Part A: Applied Science and Manufacturing, Vol.99, 221-232 (SCI)
Ullah, Mohib and Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Siddiq, M. and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) "Manufacturing functionalized mono-crystalline diamond containing electrospun fibers reinforced epoxy composites with improved mechanical characteristics", Diamond and Related Materials, Vol.76, 90-96 (SCI)
Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2017) "Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel", Journal of Mechanical Science and Technology, Vol.31, No.1, 235-247 (SCI)
Kocaman, Esat Selim and Akay, Erdem and Yılmaz, Çağatay and Türkmen, Halit Süleyman and Mısırlıoğlu, Burç and Suleman, Afzal and Yıldız, Mehmet (2017) "Monitoring the damage state of fiber reinforced composites using an FBG network for failure prediction", Materials, Vol.10, No.1 (SCI)
Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) "Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube", International Journal of Thermal Sciences, Vol.109, 54-69 (SCI)
Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)
Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet (2016) "The effect of normal electric field on the evolution of immiscible Rayleigh-Taylor instability", Theoretical and Computational Fluid Dynamics, Vol.30, No.5, 469-483 (SCI)
Akay, Erdem and Yılmaz, Çağatay and Kocaman, Esat Selim and Türkmen, Halit S. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio degradation of FRP composites under fatigue loading using biaxially embedded FBG sensors", Materials, Vol.9, No.9 (SCI)
Yılmaz, Çağatay and Akalın, Çağdaş and Kocaman, Esat Selim and Suleman, A. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio of glass fiber reinforced composites as damage index using biaxial Fiber Bragg Grating sensors", Polymer Testing, Vol.53, 98-107 (SCI)
Ghorbani, Morteza and Yıldız, Mehmet and Gözüaçık, Devrim and Koşar, Ali (2016) "Cavitating nozzle flows in micro- and minichannels under the effect of turbulence", Journal of Mechanical Science and Technology, Vol.30, No.6, 2565-2581 (SCI)
Keulen, Casey J. and Akay, Erdem and Melemez, Fazlı Fatih and Kocaman, Esat Selim and Deniz, Ataman and Yılmaz, Çağatay and Boz, Talha and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2016) "Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings", Journal of Intelligent Material Systems and Structures, Vol.27, No.1, 17-27 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2016) "Nano-engineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements", RSC Advances, Vol.6, No.12, 9495-9506 (SCI)
Haghighi Poudeh, Leila and Saner Okan, Burcu and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Design and fabrication of hollow and filled graphene-based polymeric spheres via core-shell electrospraying", RSC Advances, Vol.5, No.111, 91147-91157 (SCI)
Mısırlıoğlu, Burç and Yıldız, Mehmet and Şendur, Kürşat (2015) "Domain control of carrier density at a semiconductor-ferroelectric interface", Scientific Reports, Vol.5 (SCI)
Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet (2015) "An incompressible smoothed particle hydrodynamics method for the motion of rigid bodies in fluids", Journal of Computational Physics, Vol.297, 207-220 (SCI)
Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Tang, S. and Hamada, H. and Yıldız, Mehmet (2015) "Effect of fiber densities on impact properties of biaxial warp-knitted textile composites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1287-1297 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Design and fabrication of multi-walled hollow nanofibers by triaxial electrospinning as reinforcing agents in nanocomposites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1273-1286 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Letofsky-Papst, Ilse and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Repeated self-healing of nano and micro scale cracks in epoxy based composites by tri-axial electrospun fibers including different healing agents", RSC Advances, Vol.5, No.89, 73133-73145 (SCI)
Shadloo, Mostafa S. and Weiss, Robert and Yıldız, Mehmet and Dalrymple, Robert A. (2015) "Numerical simulation of long wave runup for breaking and nonbreaking waves", International Journal of Offshore and Polar Engineering, Vol.25, No.1, 1-7 (SCI)
Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2015) "Convective heat transfer and second law analysis of non-Newtonian fluid flows with variable thermophysical properties in circular channels", International Communications in Heat and Mass Transfer, Vol.60, 21-31 (SCI)
Zanjani, Jamal Seyyed Monfared and Saner Okan, Burcu and Letofsky-Papst, Ilse and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Rational design and direct fabrication of multi-walled hollow electrospun fibers with controllable structure and surface properties", European Polymer Journal (SI), Vol.62, 66-76 (SCI)
Rahmat, Amin and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2014) "Numerical simulation of wall bounded and electrically excited Rayleigh-Taylor instability using incompressible smoothed particle hydrodynamics", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.460, 60-70 (SCI)
Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2014) "Heat transfer characteristics of plug flows with temperature-jump boundary conditions in parallel-plate channels and concentric annuli", International Journal of Thermal Sciences, Vol.84, 252-259 (SCI)
Mısırlıoğlu, Burç and Yıldız, Mehmet (2014) "Carrier accumulation near electrodes in ferroelectric films due to polarization boundary conditions", Journal of Applied Physics, Vol.116, No.2 (SCI)
Özbulut, Murat and Yıldız, Mehmet and Gören, Ömer (2014) "A numerical investigation into the correction algorithms for SPH method in modeling violent free surface flows", International Journal of Mechanical Sciences, Vol.79, 56-65 (SCI)
Özel, Burcu and Örüm, Aslıhan and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2014) "Experimental study on the rheology of anisotropic, flocculated and low volume fraction colloids", Korea-Australia Rheology Journal, Vol.26, No.1, 105-116 (SCI)
Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2014) "Damage detection of composite plates by Lamb wave ultrasonic tomography with a sparse hexagonal network using damage progression trends", Shock and Vibration (SCI)
Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Very large dielectric response from ferroelectric nanocapacitor films due to collective surface and strain relaxation effects", Journal of Applied Physics, Vol.114, No.19 (SCI)
Safdari Shadloo, Mostafa and Rahmat, Amin and Yıldız, Mehmet (2013) "A smoothed particle hydrodynamics study on the electrohydrodynamic deformation of a droplet suspended in a neutrally buoyant Newtonian fluid", Computational Mechanics, Vol.52, No.3, 693-707 (SCI)
Tofighi, Nima and Yıldız, Mehmet (2013) "Numerical simulation of single droplet dynamics in three-phase flows using ISPH", Computers and Mathematics with Applications, Vol.66, No.4, 525-536 (SCI)
Sadek, Samir Hassan Mahmoud and Yıldız, Mehmet (2013) "Modeling die swell of second-order fluids using smoothed particle hydrodynamics", Journal of Fluids Engineering, Vol.135, No.5 (SCI)
Safdari Shadloo, Mostafa and Zainali, Amir and Yıldız, Mehmet (2013) "Simulation of single mode Rayleigh-Taylor instability by SPH method", Computational Mechanics, Vol.51, No.5, 699-715 (SCI)
Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Dielectric response of fully and partially depleted ferroelectric thin films and inversion of the thickness effect", Journal of Physics D: Applied Physics, Vol.46, No.12 (SCI)
Zainali, Amir and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2013) "Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method", Computer Methods in Applied Mechanics and Engineering, Vol.254, 99-113 (SCI)
Kurtoğlu, Evrim and Bilgin, Alp and Şeşen, Muhsincan and Mısırlıoğlu, Burç and Yıldız, Mehmet and Acar, Funda Yağcı and Koşar, Ali (2012) "Ferrofluid actuation with varying magnetic fields for micropumping applications", Microfluidics and Nanofluidics (Sl), Vol.13, No.4, 683-694 (SCI)
Yıldız, Mehmet and Özdemir, Nazlı Gülsine and Bektaş, Gökhan and Keulen, Casey J. and Boz, Talha and Şengün, Ege Fikri and Öztürk, Cem and Menceloğlu, Yusuf Z. and Suleman, Afzal (2012) "An experimental study on the process monitoring of resin transfer molded composite structures using fiber optic sensors", Journal of Manufacturing Science and Engineering - Transactions of ASME, Vol.134, No.4 (SCI)
Mısırlıoğlu, Burç and Çöloğlu, Hale Nur and Yıldız, Mehmet (2012) "Thickness driven stabilization of saw-tooth-like domains upon phase transitions in ferroelectric thin films with depletion charges", Journal of Applied Physics, Vol.111, No.6 (SCI)
Shadloo, Mostafa Safdari and Zainali , Amir and Yıldız, Mehmet and Suleman , Afzal (2012) "A robust weakly compressible SPH method and its comparison with an incompressible SPH", International Journal for Numerical Methods in Engineering, Vol.89, No.8, 939-956 (SCI)
Mısırlıoğlu, Burç and Yıldız, Mehmet (2012) "Polarization retention and switching in ferroelectric nanocapacitors with defects on tensile substrates", Solid State Electronics, Vol.67, No.1, 38-44 (SCI)
Shadloo , Mostafa Safdari and Yıldız, Mehmet (2011) "Numerical modeling of Kelvin-Helmholtz instability using smoothed particle hydrodynamics", International Journal for Numerical Methods in Engineering, Vol.87, No.10, 988-1006 (SCI)
Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2011) "Multiplexed FBG and etched fiber sensors for process and health monitoring of 2-&3-D RTM components", Journal of Reinforced Plastics and Composites, Vol.30, No.12, 1055-1064 (SCI)
Shadloo, Mostafa Safdari and Zainali, Amir and Sadek, Samir H. and Yıldız, Mehmet (2011) "Improved incompressible smoothed particle hydrodynamics method for simulating flow around bluff bodies", Computer Methods in Applied Mechanics and Engineering, Vol.200, No.9-12, 1008-1020 (SCI)
Armour, Neil and Yıldız, Mehmet and Yıldız, Emine and Dost, Sadık (2008) "Liquid phase diffusion growth of SiGe single crystals under magnetic fields", ECS Transactions, Vol.10, No.16, 135-146 ()
Yıldız, Mehmet and Rook , Rusty and Suleman, Afzal (2008) "SPH with the multiple boundary tangent method", International Journal for Numerical Methods in Engineering (SCI)
Book
Yıldız, Mehmet and Dost, Sadık, Growth of bulk SiGe single crystals by liquid phase diffusion method: experimental and computational aspects , Germany: VDM Verlag, April 2009
Book Section / Chapter
Haghighi Poudeh, Leila and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "Three-dimensional graphene-based structures: production methods, properties, and applications", Handbook of Graphene: Growth, Synthesis, and Functionalization, Celasco, Edvige and Chaika, Alexander N. (eds.), USA: Wiley-Scrivener, July 2019, 359-387
Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z., "Polymer composites containing functionalized nanoparticles and the environment", Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications, Pielichowski, Krzysztof and Majka, Tomasz (eds.), Amsterdam: Elsevier, January 2019, 437-466
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Self-healing thermosetting composites: concepts, chemistry and future advances", Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials, Delville, Marie-Helene and Taubert, Andreas (eds.), UK: Wiley, September 2018
Rocha, B. and Silva, C. and Keulen, C. and Yıldız, Mehmet and Suleman, A., "New trends in SHM, structural health monitoring of aircraft structures", New Trends in Structural Health Monitoring, Wieslaw, Ostachowicz and Güemes, Alfredo (eds.), Germany: Springer, January 2013
Esin, Yeşim Hümay and Ünel, Mustafa and Yıldız, Mehmet, "Formation control of multiple robots using parametric and implicit representations", Advanced Intelligent Computing Theories and Applications. With Aspects of Artificial Intelligence, Huang , D.-S. (ed.), Berlin / Heidelberg: Springer 2008, 558-565
Papers in Conference Proceedings
Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet, "Acoustic emission monitoring of glass/carbon hybrid fiber/epoxy composites under flexural and tensile loading conditions", 5th International Conference on Mechanics of Composites (MECHCOMP), University of Porto, July 2019
Ramezanzadeh, Shayan and Özbulut, M. and Yıldız, Mehmet, "Simulation of irregular wave motion using a flap-type wavemaker", Bensow, R. and Ringsberg, J. (eds.), VIII. International Conference on Computational Methods in Marine Engineering (MARINE 2019), International Centre for Numerical Methods in Engineering, May 2019, 771-782
Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet, "Observation of damage accumulation under in-plane shear loading", Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), NATO Science & Technology Organization, December 2018
Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet, "Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, September 2018
Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A., "Topology optimization of cracked structures using peridynamics", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, September 2018
Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet, "Isogeometric analysis using peridynamics and XFEM", 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, January 2018
Tofighi, Nima and Yıldız, Mehmet and Suleman, Afzal, "Numerical simulation of the sedimentation of an elliptic particle under external electric field using ISPH", Onate, E. and Wriggers, P. and Zohdi, T. and Bischoff, M. and Owen, D. R. J. (eds.), 5th International Conference on Particle-Based Methods - Fundamentals and Applications (PARTICLES 2017), International Center for Numerical Methods in Engineering, September 2017, 918-929
Kefal, Adnan and Yıldız, Mehmet and Öterkuş, E., "Structural health monitoring of a wing-shaped sandwich panel using iFEM-RZT methodology", 3rd Turkey-Japan Workshop (TJW) on Polymeric Composite Materials, Sabanci University, July 2017
Tofighi, Nima and Özbulut, Murat and Yıldız, Mehmet, "Deformation of a droplet in couette flow subject to an external electric field simulated using ISPH", Onate, E. and Bischoff, M. and Owen, D. R. J. and Wriggers, P. and Zohdi, T. (eds.), IV International Conference on Particle-Based Methods: Fundamentals and Applications, Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering), September 2015
Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet, "ISPH simulation of the motion of elliptic particles under external electric field", 10th International Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) Workshop, UK: SPHERIC (Smoothed Particle Hydrodynamics European Research Interest Community), June 2015
Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet, "Migration of a rigid disc in couette flow subject to an external electric field simulated using ISPH", Schrefler, Bernhard A. and Oñate, Eugenio and Papadrakakis, Manolis (eds.), 6th International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS), Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering), May 2015, 725-733
Özbulut, Murat and Tofighi, Nima and Gören, Ömer and Yıldız, Mehmet, "On the SPH modelling of flow over cylinder beneath to a free-surface", VI International Conference on Computational Methods in Marine Engineering (Marine 2015), Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering) 2015
Özbulut, Murat and Tofighi, Nima and Yıldız, Mehmet and Gören, Ömer, "Sph modelling of long-term sway-sloshing motion in a rectangular tank", The Twenty-fifth International Offshore and Polar Engineering Conference, Richardson, Texas: International Society of Offshore and Polar Engineers 2015
Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet, "Numerical investigation of electrically excited RTI using ISPH method", Onate, E. and Oliver, J. and Huerta, A. (eds.), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain: ECCOMAS, July 2014
Demircan, Özgür and Yılmaz, C. and Kocaman, E. S. and Akay, E. and Yıldız, Mehmet, "Tensile and bending properties of biaxial warp knitted textile composites", 1st Joint Turkey-Japan Workshop (JTJW) on Polymeric Composite Materials, Istanbul, Turkey: Sabanci University, May 2014
Monfared Zanjani, Jamal Seyyed and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z., "Fabrication and morphological investigation of multi-walled electrospun polymeric nanofibers", MRS Fall 2013 Meeting, Warrendale, PA, USA: Materials Research Society 2014
Tofighi, Nima and Yıldız, Mehmet, "ISPH simulation of droplet spreading at different eotvos numbers", Simos, T. and Psihoyios, G. and Tsitouras, C. (eds.), 11th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM), Melville, NY, USA: AIP (American Institute of Physics), October 2013, 128-131
Chelliah, Pandian and Deniz, A. and Kuelen, C. and Bektaş, Gökhan and Boz, Talha and Melemez, Fazlı Fatih and Öztürk, Cem and Suleman, A. and Yıldız, Mehmet, "Simulation studies of spectral subtraction based temperature compensation of FBG sensor for structural health monitoring based on principal component analysis", 9th International Workshop on Structural Health Monitoring (IWSHM 2013), Stanford, CA: Stanford University, September 2013, 478-478
Rahmat, Amin and Safdari Shadloo, Mostafa and Tofighi, Nima and Yıldız, Mehmet, "The simulation of the Rayleigh Taylor instability for high density ratios and infinity bond number with SPH method", III International Conference on Particle-Based Methods: Fundamentals and Applications (Particles 2013), Spain: ECCOMAS, September 2013
Tofighi, Nima and Rahmat, Amin and Yıldız, Mehmet, "Numerical simulation of buoyancy driven droplet rising under influence of an electrical field using ISPH", III International Conference on Particle-Based Methods: Fundamentals and Applications (Particles 2013), Spain: ECCOMAS, September 2013
Tofighi, Nima and Yıldız, Mehmet, "Incompressible smoothed particle hydrodynamics simulation of three phase flows", 21st Annual Conference of the CFD Society of Canada, Sherbrooke, Canada: CFD Society of Canada, May 2013
Melemez, Fazlı Fatih and Boz, Talha and Chelliah, Pandian and Bektaş, Gökhan and Yıldız, Mehmet and Öztürk, Cem and Menceloğlu, Yusuf Z., "Study of local and transient buckling in glass fiber reinforced composite using fiber bragg grating", Hristoforou, E. and Vlachos, D. S. (eds.), 2nd International Conference on Materials and Applications for Sensors and Transducers (IC-MAST), Zurich, Switzerland: Trans Tech Publications 2013, 346-351
Boz, Talha and Chelliah, Pandian and Bektaş, Gökhan and Melemez, Fazlı Fatih and Yıldız, Mehmet and Öztürk, Cem, "Damage detection in composite plates using fiber bragg gratings", 15th European Conference on Composite Materials (ECCM15), Venice, Italy: European Society for Composite Materials 2012
Özbulut, Murat and Yıldız, Mehmet and Gören, Ömer, "A numerical refinement study on the SPH modeling of the violent free surface flows", The 2nd International Conference on Violent Flows (VF-2012), France: Ecole Centrale de Nantes 2012
Sadek, Samir Hassan and Yıldız, Mehmet, "Numerical simulation of die swell of second-order fluids using smoothed particle hydrodynamic", ASME 2010 International Mechanical Engineering Congress & Exposition (IMECE2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers) 2012
Safdari Shadloo, Mostafa and Yıldız, Mehmet, "Two-phase electrohydrodynamics by smoothed particles hydrodynamic", International Conference on Numerical Methods in Multiphase Flows, Pennsylvania, United States : Penn State University, State College 2012
Safdari Shadloo, Mostafa and Yıldız, Mehmet, "Simulation of Rayleigh-Taylor instability by smoothed particle hydrodynamics: advantages and limitations", Simos, Theodore E. and Psihoyios, George and Tsitouras, C. and Anastassi, Zacharias (eds.), 10th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2012), Melville, New York: American Institute of Physics 2012, 90-94
Tofighi, Nima and Zainali, Amir and Yıldız, Mehmet, "Modelling of bubble rising by smoothed particle hydrodynamics method", Simos, Theodore E. and Psihoyios, George and Tsitouras, C. and Anastassi, Zacharias (eds.), 10th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2012), Melville, New York: American Institute of Physics 2012, 95-98
Bektaş, Gökhan and Boz, Talha and Keulen, Casey J. and Yıldız, Mehmet and Öztürk, Cem and Menceloğlu, Yusuf Z. and Suleman, Afzal, "Fiber Bragg grating and etched optic sensors for flow and cure monitoring of resin transfer molded composite structures", The 18th International Conference on Composite Materials (ICCM18), Seul, Korea: The Korean Society for Composite Materials 2011
Melemez, Fazlı Fatih and Boz, Talha and Chelliah, Pandian and Bektaş, Gökhan and Yıldız, Mehmet and Öztürk, Cem and Menceloğlu, Yusuf Z., "Fatigue monitoring of glass fiber reinforced composite using fiber Bragg grating", 14th International Conference on Advances in Materials & Processing Technologies (AMPT-2011), Istanbul, Turkey: Dekon Congress & Tourism 2011
Mısırlıoğlu, Burç and Yıldız, Mehmet, "Stabilization and thickness dependence of depletion charge induced domains in ferroelectric nano capacitors", Joint Conference on IEEE International Symposium on Applications of Ferroelectrics (ISAF/PFM)/ International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials, USA: IEEE (Institute of Electrical and Electronics Engineers) 2011
Safdari Shadloo, Mostafa and Yıldız, Mehmet, "ISPH modeling of Rayleigh–Taylor instability", 6th International SPHERIC SPH-Workshop, Hamburg, Germany: The Institute for Fluid Dynamics and Ship Theory of the Hamburg University of Technology 2011
Shadloo, Mostafa Safdari and Yıldız, Mehmet, "Kelvin-Helmholtz instability by SPH", Onate, E. and Owen, D. R. J. (eds.), ECCOMAS Thematic Conference: 2nd International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2011), Barcelona, Spain: ECCOMAS 2011
Zainali, Amir and Tofighi, Nima and Yıldız, Mehmet, "Numerical investigation of three-phase flows using incompressible smoothed particle hydrodynamics", Onate, E. and Owen, D. R. J. (eds.), ECCOMAS Thematic Conference: 2nd International Conference on Particle-based Methods - Fundamentals and Applications (PARTICLES 2011), Barcelona, Spain: ECCOMAS 2011
Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal, "Fiber optic sensors for flow and health monitoring of resin transfer molded composite structures ", Composites 2009 - 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London, UK: Imperial College, April 2009