Adnan  Kefal

Türkçe sürüm

Adnan Kefal

E-mail : adnankefalsabanciuniv.edu

Education :

PhD, Naval Architecture, Ocean and Marine Engineering, University of Strathclyde, Glasgow, United Kingdom, 2017
BSc, Naval Architecture and Marine Engineering, Istanbul Technical University, Istanbul, Turkey, 2013
BSc (Erasmus exchange program), Naval Architecture, Ship Science, University of Southampton, Southampton, United Kingdom, 2011-2012

Areas of Interest :

Computational and experimental mechanics; Large-scale design and analysis; Structural health monitoring; Shape sensing; Composite and sandwich structures; Structural topology optimization; Additive manufacturing; Isogeometric analysis; Finite element analysis; Peridynamic theory; Beam, plate and shell theories.

Membership :

International Ship Structures Committee (ISSC), Royal Society of Naval Architects (RINA), The American Institute of Aeronautics and Astronautics (AIAA), Turkish Chamber of Naval Architects and Marine Engineers

Publications :

Article
Alkhateab, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)
Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)
Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) "A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements", Sensors, Vol.20, No.14 (SCI)
Kefal, Adnan (2020) "A novel four-node inverse-plate element for shape and stress sensing of laminated composite and sandwich plates", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.35, No.4, 1767-1781 (SCI)
Özdemir, Murat and Kefal, Adnan and Imachi, Michiya and Tanaka, Satoyuki and Öterkuş, Erkan (2020) "Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics", Composite Structures, Vol.244 (SCI)
Kefal, Adnan and Öterkuş, Erkan (2020) "Isogeometric iFEM analysis of thin shell structures", Sensors, Vol.20, No.9 (SCI)
Li, Mingyang and Kefal, Adnan and Öterkuş, Erkan and Öterkuş, Selda (2020) "Structural health monitoring of an offshore wind turbine tower using iFEM methodology", Ocean Engineering, Vol.204 (SCI)
Li, Mingyang and Kefal, Adnan and Cerik, Burak Can and Öterkuş, Erkan (2020) "Dent damage identification in stiffened cylindrical structures using inverse finite element method", Ocean Engineering, Vol.198 (SCI)
Kefal, Adnan (2019) "An efficient curved inverse-shell element for shape sensing and structural health monitoring of cylindrical marine structures", Ocean Engineering, Vol.188 (SCI)
Haşim, Kazım Ahmet and Kefal, Adnan and Madenci, Erdoğan (2019) "Isogeometric plate element for unstiffened and blade stiffened laminates based on refined zigzag theory", Composite Structures, Vol.222 (SCI)
Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) "A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams", Composites Part B: Engineering, Vol.167, 100-121 (SCI)
Kefal, Adnan and Maruccio, Claudio and Quaranta, Giuseppe and Öterkuş, Erkan (2019) "Modelling and parameter identification of electromechanical systems for energy harvesting and sensing", Mechanical Systems and Signal Processing, Vol.121, 890-912 (SCI)
Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)
Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)
Kefal, Adnan and Tessler, Alexander and Öterkuş, Erkan (2017) "An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures", Composite Structures, Vol.179, 514-540 (SCI)
Papers in Conference Proceedings
Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet, "Numerical investigation on effective toughening mechanisms of graded composites", Joint Event: ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, University of Porto, September 2020
Maruccio, Claudio and Montegiglio, Pasquale and Acciani, Giuseppe and Kefal, Adnan, "Nonlinear modelling of t-shaped piezoelectric device for structural health monitoring and fluid energy harvesting", International Conference on Electrical, Communication, and Computer Engineering (ICECCE), IEEE, August 2020
Maruccio, Claudio and Kefal, Adnan, "Electromechanical contact elements for modelling adhesion and interfacial interactions in electrospun nanofibers systems", 1st Virtual Euroepan Conference on Fracture (VECF1), Elsevier, June 2020
Maruccio, Claudio and Montegiglio, Pasquale and Kefal, Adnan, "Parameter identification strategy for online detection of faults in smart structures for energy harvesting and sensing", 1st Virtual Euroepan Conference on Fracture (VECF1), Elsevier, June 2020
Sohouli, Abdolrasoul and Kefal, Adnan and Yıldız, Mehmet and Suleman, Afzal, "Multi-material topology optimization of structures using peridynamics", 30th International Conference on Adaptive Structures and Technologies (ICAST2019), Concordia University, October 2019
Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet, "Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, September 2018
Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A., "Topology optimization of cracked structures using peridynamics", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, September 2018
Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet, "Isogeometric analysis using peridynamics and XFEM", 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, January 2018
Kefal, Adnan and Yıldız, Mehmet and Öterkuş, E., "Structural health monitoring of a wing-shaped sandwich panel using iFEM-RZT methodology", 3rd Turkey-Japan Workshop (TJW) on Polymeric Composite Materials, Sabanci University, July 2017
Before SU Publications:
  1. Yildizdag, M.E., Ardic, I.T., Kefal, A., and Ergin, A., 2020. An isogeometric FE-BE method and experimental investigation for the hydroelastic analysis of a horizontal circular cylindrical shell partially filled with fluid. Thin-Walled Structures, 151, p.106755.
  2. Kefal, A., Sohouli, A., Oterkus, E., Yildiz, M., and Suleman, A., 2019. Topology optimization of cracked structures using peridynamics. Continuum Mechanics and Thermodynamics, 31(6), pp. 1645-1672.
  3. Tabrizi, E.I.,  Kefal, A., , Zanjani, J.S.M., Akalin, C., and Yildiz, M., 2019. Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory. Composite Structures, 223, pp.110971.
  4. Basoglu, M.F., Zerin Z., Kefal, A., and Oterkus, E., 2019. A computational model of peridynamic theory for deflecting behavior of crack propagation with micro-cracks. Computational Materials Science, 162, pp.33-46.
  5. Kefal, A., and Oterkus, E., 2016. Displacement and stress monitoring of a chemical tanker based on inverse finite element method. Ocean Engineering, 112, pp. 33-46.
  6. Kefal, A., Oterkus, E., Tessler, A., and Spangler, J., 2016. A quadrilateral inverse-shell element with drilling degrees of freedom for shape sensing and structural health monitoring. Engineering Science and Technology, an International Journal, 19, pp. 1299-1313.
  7. Kefal, A., and Oterkus, E., 2016. Displacement and stress monitoring of a Panamax containership using inverse finite element method. Ocean Engineering, 119, pp. 16-29.