Morteza  Ghorbani

Türkçe sürüm

Morteza Ghorbani

E-mail : mghorbanisabanciuniv.edu

Personal web page

Education :

Sabancı University, Istanbul, Turkey September 2013 - January 2017

Ph.D. in Mechatronics Engineering

Micro-Nano Scale Heat Transfer & Microfluidic Research Group

Supervised by Prof. Ali Kosar

Thesis Title: Microscale Cavitating Flow Patterns and Spray Characteristics with Applications

Islamic Azad University, Takestan Branch, Iran 2009-2011

MSc in Mechanical Engineering

Supervised by Prof. M.T. Shervani-Tabar

Thesis Title: Numerical Study on the Behavior of Fuel Spray due to Cavitation Phenomenon with

Different Angles of Nozzle

Islamic Azad University, Tabriz Branch, Iran 2004-2008

BSc in Mechanical Engineering,

Work Experience :

SUNUM; Sabancı University Nanotechnology Research and Application Centre February

2017 - Present

Istanbul, Turkey

Post Doctoral Associate Researcher in Microscale Cavitating Flow through Transparent Orifi ces

Center for CFD Studies on Heat Engines, Cavitational Flows and Petroleum Industries,

University of Tabriz 2012 - 2013

Tabriz, Iran

Research Assistant in Spray Charcterization of Diesel Injection Engines under the Effect of Cavitation

Phenomenon

Yekta Sane Ab Company (PJS) 2009 - 2011

Tabriz, Iran

Responsible of Technical Office for Executive Projects in Pipping

Areas of Interest :

Fluid Mechanics; Cavitation; CFD; Microfluidics and Nanofluidics

Publications :

Article
Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Villanueva, L. Guillermo and Koşar, Ali (2018) "Hydrodynamic cavitation in microfluidic devices with roughened surfaces", Journal of Micromechanics and Microengineering, Vol.28, No.7 (SCI)
Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali (2018) "Biomedical device prototype based on small scale hydrodynamic cavitation", AIP Advances, Vol.8, No.3 (SCI)
Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2018) "Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation", Experimental Thermal and Fluid Science, Vol.91, 89-102 (SCI)
Ghorbani, Morteza and Mohammadi, Ali and Motezakker, Ahmad Reza and Villanueva, Luis Guillermo and Leblebici, Yusuf and Koşar, Ali (2017) "Energy harvesting in microscale with cavitating flows", ACS Omega, Vol.2, No.10, 6870-6877 (ESCI)
Ghorbani, Morteza and Sadaghiani, Abdolali Khalili and Yıldız, Mehmet and Koşar, Ali (2017) "Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel", Journal of Mechanical Science and Technology, Vol.31, No.1, 235-247 (SCI)
Papers in Conference Proceedings
Sözer, Canberk and Ghorbani, Morteza and Alcan, Gökhan and Üvet, Hüseyin and Ünel, Mustafa and Koşar, Ali, "Design, prototyping and control of a flexible cystoscope for biomedical applications", 4th International Conference on Mechanics and Mechatronics Research (ICMMR 2017), IOP Publishing, August 2017
Before SU Publications:

[1] Ghorbani, M., Khalili Sadaghiani, A., Yildiz, M., and Kosar, A., ‘Experimental and Numerical Investigations on the Spray Collapse under the Effect of Cavitation Phenomenon in a Microchannel’, Journal of Mechanical Sciences and Technology, Volume 31,  Issue 1, 235-247, 2017.

[2] Ghorbani, M., Alcan, G., Unel, M., Sabanovic, A., Uvet, H., Gozuacik, D., and Kosar, A., ‘Visualization of microscale cavitating flow regimes via particle shadow sizing imaging and vision based estimation of the cone angle’, Experimental Thermal and Fluid Sciences, Volume 78, 322-333, 2016.

[3] GhorbaniM., Oral, O., Ekici, S., Gozuacik, D., and Kosar, A., ‘Review on Lithotripsy and Cavitation in Urinary Stone Therapy’, IEEE Reviews in Biomedical Engineering, Volume 9, 264-283, 2016.

[4] Ghorbani, M., Yildiz, M., Gozuacik, D., and Kosar, A., ‘Cavitating Nozzle Flow in Micro and Mini Channels under the Effect of Turbulence, Journal of Mechanical Sciences and Technology, Volume 30, Issue 6, 2565-2581, 2016.

[5] Ghorbani, M., and Akbarpour, S., ‘The Multi Zone Model of the Low Heat Rejection Engine for DI Diesel Injection Engines’, Journal of the Brazilian Society of Mechanical Sciences and EngineeringVolume 38, Issue 2, 365-375, 2016.

[6] Alcan, G., Ghorbani, M., Kosar, A., and Unel, M.,, ‘A New Visual Tracking Method for the Analysis and Characterization of Jet Flow’, Flow Measurement and Instrumentation, Volume 51, 55-67, 2016.

[7] Karimzadehkhouei, M., Ghorbani, M., Sendur, K., Menguc, M. P., Leblebici, Y., and Kosar, A., ‘Increasing the Stability of Nanofluid with Cavitating Flows  in Microorifices’, Applied Physics Letters, Volume 109, Issue 10, 104101, 2016.

[8] Akbarpour, S., and Ghorbani, M., ‘Numerical Investigation on the External Compressible Flow around NACA m1 and NACA 0015 Airfoils’, Scientia Iranica, Volume 20, Number 5, 1508-1516, 2013.

[9] Shervani-Tabar, M. T., Sheykhvazaye, M., and Ghorbani, M., ‘Numerical Study on the Effect of the Injection Pressure on spray Penetration Length’, Applied Mathematical Modelling, Volume 37, Issues 14–15, 7778–7788, 2013.

[10] Shervani-Tabar, M. T., Parsa, S., and Ghorbani, M.,‘Numerical Study on the Effect of the Cavitation Phenomenon on the Characteristics of Fuel Spray’, Mathematical and Computer Modelling, Volume 56, Issues 5–6, 105–117, 2012.

[11] Ghorbani, M., Alcan, G., Mohammadi, A., Khalili Sadaghiani, A, Unel, M., Gozuacik, D., and Kosar, A. “Visualization and Droplet Segmentation of Cavitating Flows in Micro Orices Using Active Contours,” Submitted to Experimental Thermal and Fluid Sciences.

[12] Ghorbani, M., Mohammadi, A., Motazakker, A., Villanueva, L. G., Leblebici, Y., and Kosar, A. “Energy Harvesting in Micro Scale with Cavitating Flow,” Submitted to Applied Energy.

[13] Ghorbani, M., Alcan, G., Sozer, C., Unel, M., Kosar, A., “Design, prototypoing and fabricate a cavitating ow induced endoscopy for biomedical applications,” In preparation to be submitted to Scientic Reports.