Lutfi Taner Tunc

Türkçe sürüm

Lutfi Taner Tunc

E-mail : ttuncsabanciuniv.edu

Personal web page

Education :

2010 - Sabanci University, Industrial Engineering, PhD


2006 - Sabanci University, Industrial Engineering, MSc


2004 - Middle East Technical Universite, Mechanical Engineering, Undergraduate

Work Experience :

Nuclear AMRC, The University of Sheffield, 2014 - 2017
Maxima Manufacturing R&D, 2011-2014
Sabanci University, Part-Time instructor, 2011 - 2014

Areas of Interest :

Multi-axis milling. Machine Tool Dynamics, Metal Cutting Dynamics. Tool path generation. Robotic frezeleme.

Membership :

CIRP Associate Member

Publications :

Article
Iglesias, Alexander and Tunç, Lütfi Taner and Özsahin, Orkun and Franco, Oier and Munoa, Jokin and Budak, Erhan (2022) "Alternative experimental methods for machine tool dynamics identification: a review", Mechanical Systems and Signal Processing, Vol.170 (SCI)
Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner and Gönül, Bora (2022) "Development of a vision based pose estimation system for robotic machining and improving its accuracy using LSTM neural networks and sparse regression", Robotics and Computer Integrated Manufacturing, Vol.74 (SCI)
Balanji, Hamid Majidi and Turgut, Ali Emre and Tunç, Lütfi Taner (2022) "A novel vision-based calibration framework for industrial robotic manipulators", Robotics and Computer Integrated Manufacturing, Vol.73 (SCI)
Poyraz, Özgür and Yasa, Evren and Tunç, Lütfi Taner and Kilicay, Koray (2021) "Parametric simulations for residual stresses and distortions of Inconel 625 fabricated by laser powder bed fusion additive manufacturing", Journal of Additive Manufacturing Technologies, Vol.1, No.2 (NA)
Tunç, Lütfi Taner and Gönül, Bora (2021) "Effect of quasi-static motion on the dynamics and stability of robotic milling", CIRP Annals, Vol.70, No.1, 305-308 (SCI)
Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) "Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces", International Journal of Advanced Manufacturing Technology, Vol.114, No.11-12, 3581-3596 (SCI)
Tunç, Lütfi Taner (2019) "Effect of MQL conditions on tool life in milling of AISI 316L stainless steel", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.34, No.4, 1665-1677 (SCI)
Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Öztürk, Erdem and Tunç, Lütfi Taner (2019) "Robots in machining". Published Online First http://dx.doi.org/10.1016/j.cirp.2019.05.009
Tunç, Lütfi Taner (2019) "Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models", Robotics and Computer Integrated Manufacturing, Vol.56, 212-221 (SCI)
Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)
Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) "Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems", Mechanical Systems and Signal Processing, Vol.111, 423-441 (SCI)
Tunç, Lütfi Taner and Özşahin, Orkun (2018) "Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes". Published Online First http://dx.doi.org/10.1007%2Fs40436-018-0233-x
Tunç, Lütfi Taner (2018) "Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1891-1909 (SCI)
Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) "Generalized model for dynamics and stability of multi-axis milling with complex tool geometries", Journal of Materials Processing Technology, Vol.238, 446-458 (SCI)
Tunç, Lütfi Taner (2016) "Rapid extraction of machined surface data through inverse geometrical solution of tool path information", International Journal of Advanced Manufacturing Technology, Vol.87, No.1-4, 353-362 (SCI)
Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) "Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach", International Journal of Advanced Manufacturing Technology, Vol.77, No.1-4, 341-355 (SCI)
Tunç, Lütfi Taner and Budak, Erhan (2013) "Identification and modeling of process damping in milling", Journal of Manufacturing Science and Engineering, Vol.135, No.2 (SCI)
Tunç, Lütfi Taner and Budak, Erhan (2012) "Effect of cutting conditions and tool geometry on process damping in machining", International Journal of Machine Tools and Manufacture, Vol.57, 10-19 (SCI)
Budak, Erhan and Tunç, Lütfi Taner and Alan, Salih and Özgüven, H. Nevzat (2012) "Prediction of workpiece dynamics and its effects on chatter stability in milling", CIRP Annals - Manufacturing Technology, Vol.61, No.1, 339-342 (SCI)
Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) "Analytical methods for increased productivity in five-axis ball-end milling", International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol.4, No.3/4, 238-265 (NA)
Budak, Erhan and Tunç, Lütfi Taner (2010) "Identification and modeling of process damping in turning and milling using a new approach", CIRP Annals - Manufacturing Technology, Vol.59, No.1, 403-408 (SCI)
Papers in Conference Proceedings
Urresti, Ramon Torres Iker and Tunç, Lütfi Taner and Munoa, Jokin and Memis, Namik Kemal and Orbegozo, Iban and Ece, Remzi Ecmel and Torres, Ramon, "Spindle and cutting tools for internal suction of chip and dust in CFRP trimming", 11th International Congress on Machining (UTIS 2021), -, December 2021
Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner, "Improved vision based pose estimation for industrial robots via sparse regression", 2020 International Conference on Intelligent Computing, Springer, October 2020
Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner, "Improving vision based pose estimation using LSTM neural networks", 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), IEEE (Institute of Electrical and Electronics Engineers), October 2020
Gönül, Bora and Tunç, Lütfi Taner, "Model based analysis of kinematic redundancy for increased chatter stability in robotic milling", 10th International Congress on Machining, UTIS, November 2019
Özcan, Yiğit and Tunç, Lütfi Taner, "Experimental investigation on tool path patterns in controlled depth abrasive water jet machining", 15th International Conference on High Speed Machining (HSM 2019), CMTS (Czech Machine Tool Society), October 2019
Tunç, Lütfi Taner and Seçer, Ragıp Orkun, "Investigation of process damping in robotic milling", 15th International Conference on High Speed Machining (HSM 2019), CMTS (Czech Machine Tool Society), October 2019
Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Improved stable conditions in robotic milling by kinematic redundancy", Mcleay, Tom and Öztürk, Erdem and Msaoubi, Rachid (eds.), 17th CIRP Conference on Modelling of Machining Operations, Elsevier, June 2019, 485-490
Özcan, Yiğit and Tunç, Lütfi Taner, "Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM)", International Symposium on Machining,, November 2018
Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Kinematic based selection of the workpiece location in robotic milling", International Symposium on Machining,, November 2018
Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter, "Identification of the CIRP expertise network based on public data", Kjellberg, T. and Wang, L. and Ji, W. and Wang, X. V. (eds.), 51st CIRP Conference on Manufacturing Systems, Elsevier, June 2018, 165-168
Tunç, Lütfi Taner and Sapmaz, Ömer Faruk, "Challenges for industrial robots towards milling applications", 8th International Symposium on Machining (UTIS 2017), UTIS, November 2017
Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan, "Industrial applications of science integrated machining approach", Kılıç, Engin (ed.), 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Ankara, Turkey: METU (Middle East Technical University), June 2012
Tunç, Lütfi Taner and Budak, Erhan, "Effect of cutting conditions and tool geometry on process damping in machining", Bouzakis, K. (ed.), 4th International Conference on Manufacturing Engineering (ICMEN2011), Thessaloniki, Greece: Aristoteles University of Thessaloniki, October 2011
Özkırımlı, Ömer M. and Tunç, Taner L. and Budak, Erhan, "Simulation of multi-axis machining processes using z-mapping technique", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey: Atılım University, June 2011
Before SU Publications:

Tunc L.T., Stoddard D., (2017), Selection of tool path pattern in robotic milling for increased chatter-free material removal. Accepted for publication in the Special Issue on “machining chatter”- International Journal of Advanced Manfuacturing Technology.

Tunc L.T., Budak E., Bilgen S., Zatarain, M. (2016), Process simulation integrated tool axis selection for 5-axis toolpath generation, CIRP Annals, Manufacturing Technology- Vol.65 – Accepted for publication.

Tunc L.T., Shaw J., (2016), Investigation of the Effects of Stewart Platform Type Industrial Robot on Stability of Robotic Milling, The International Journal of Advanced Manufacturing Technology, 1-14. DOI:10.1007/s00170-015-7600-6

Tunc L.T., Shaw J., (2015), Experimental Study on Investigation of Dynamics of Hexapod Robot for Mobile Machining, International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-015-7600-6.