Erdem Öztürk
E-posta : erdemoz
su.sabanciuniv.edu
Yayınlar :
| Article |
| Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) "Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes", Journal of Sound and Vibration, Vol.360, 17-30 (SCI) |
| Budak, Erhan and Çomak, Alptunç and Öztürk, Erdem (2013) "Stability and high performance machining conditions in simultaneous milling", CIRP Annals - Manufacturing Technology, Vol.62, No.1, 403-406 (SCI) |
| Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) "Analytical methods for increased productivity in five-axis ball-end milling", International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol.4, No.3/4, 238-265 (NA) |
| Öztürk, Erdem and Budak, Erhan (2010) "Dynamics and stability of five-axis ball-end milling", Transactions of the ASME Journal of Manufacturing Science and Engineering, Vol.132, No.2 (SCI) |
| Öztürk, Erdem and Tunç, Taner L. and Budak, Erhan (2009) "Investigation of lead and tilt angle effects in 5-axis ball-end milling processes", International Journal of Machine Tools and Manufacture, Vol.49, No.14, 1053-1062 (SCI) |
| Budak, Erhan and Öztürk, Erdem and Tunç, Taner L. (2009) "Modeling and simulation of 5-axis milling processes", CIRP Annals - Manufacturing Technology, Vol.58, No.1, 347-350 (SCI) |
| Papers in Conference Proceedings |
| Öztürk, Erdem and Budak, Erhan, "Modeling dynamics of parallel turning operations", 4th CIRP International Conference on High Performance Cutting (HPC 2010), Paris, France: CIRP, October 2010 |
| Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Öztürk, Erdem and Murtezaoğlu, Yavuz and Budak, Erhan, "Machining strategy development in 5-axis milling operations using process models", 4th CIRP International Conference on High Performance Cutting (HPC 2010), Paris, France: CIRP, October 2010 |
| Öztürk, Erdem and Budak, Erhan, "Tool orientation effects on the geometry of 5-axis ball-end milling", Hinduja, Srichand and Li, Lin (eds.), 36th International Matador Conference, Berlin, Germany: Springer, July 2010, 243-246 |
| Öztürk, Erdem and Budak, Erhan, "Modeling dynamics of parallel milling processes in time-domain", Altıntaş, Yusuf (ed.), 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Paris, France: CIRP, June 2010 |
| Öztürk, Erdem and Özkırımlı, Ömer Mehmet and Süren, Gökhan and Budak, Erhan and Aksu, B., "Increasing productivity in die machining through process modelling", 5th International Conference and Exhibition on Design And Production of Machines And Dies/Molds, Kuşadası, Aydın, Türkiye: CIRP (International Academy for Production Engineering), June 2009 |
| Öztürk, Erdem and Özlü, Emre and Budak, Erhan, "Modeling dynamics and stability of 5-axis milling processes", Micari, Fabrizio and Filice, Luigino (eds.), 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy: University of Calabria, August 2007 |
| Öztürk, Erdem and Budak, Erhan, "5 eksen frezelemede kuvvet ve şekil hatalarının modellenmesi", TIMAK Conference, Balıkesir: Balıkesir Üniversitesi, April 2006 |
| Öztürk, Erdem and Budak, Erhan, "Modeling of 5-axis forces", Proceedings of the 8th International Workshop on Modeling of Machining Operations, Chemnitz, Germany: -, May 2005, 319-326 |