Kaan Bilge

E-mail : kaan.bilgesabanciuniv.edu

Publications :

Article

Kurtulmuş, Gizem and Bilge, Kaan and Menceloğlu, Yusuf Z. (2026) "Reduction of volatile organic compounds with hydrazine-, carboxybetaine- and aminosilane-functionalized halloysite nanotube in recycled polyolefin blends", Journal of Applied Polymer Science, Vol.143, No.3 (SCI)

Baykal, Ayberk and Aksan, Onur Alp and Oral, Ahmet Yavuz and Bilge, Kaan and Kizildag, Nuray (2025) "On the processability and antibacterial activity of silver nitrate nanocomposites manufactured by stereolithography", ACS Omega, Vol.10, No.21, 21391-21404 (SCI)

Ufuk, Recep and Kıral, Barış Emre and Papila, Melih and Bilge, Kaan (2025) "The effect of PA66 nanofibrous interlayers on mode II delamination behavior of filament-wound CFRP laminates at room and cryogenic temperatures". Published Online First https://dx.doi.org/10.1007/s10443-025-10353-1

Bilge, Kaan and Javanshour, F. and Raheman, Abdul Bari and Papila, Melih (2025) "A comparative fractographic analysis for the effect of polymeric nanofiber reinforcements on the tensile behavior of multi-layered epoxy nanocomposites", Polymer Engineering and Science, Vol.65, No.5, 2343-2352 (SCI)

Bilge, Kaan and Baykal, Ayberk and Kızıldağ, Nuray (2025) "Tensile failure mechanisms in additively manufactured brittle/ductile UV-curable resins and their nanocomposites with superior strength". Published Online First https://dx.doi.org/10.1007/s40964-025-01100-w

Bilge, Kaan (2024) "Grid-by-grid fractographic analysis of additively manufactured UV-cured resins for pre-programmable failure", Journal of Failure Analysis and Prevention, Vol.24, No.6, 2787-2793 (ESCI)

Arıtürk, Gizem Semra and Bilge, Kaan and Girişken, Çağla and Seven, Senem Avaz and Menceloğlu, Yusuf Z. (2024) "A sustainable hybrid strengthening/stiffening approach for injection molded polypropylene matrix thermoplastic composites", Polymer Engineering and Science, Vol.64, No.11, 5600-5612 (SCI)