Mahmut Faruk  Akşit

English version

Mahmut Faruk Akşit

E-posta : aksitsabanciuniv.edu

Kişisel web sayfası

Eğitim :

Dereceler:

Doktora, Makine Mühendisliği, Rensselaer Polytechnic Institute, Troy, NY, Mayıs 1998
Tez: A Computational Study of Brush Seal Contact Loads with Friction.
Tez Danışmanı: Prof. Dr. John A. Tichy

Yüksek Lisans, Makine Mühendisliği, Rensselaer Polytechnic Institute, Troy, NY, Ağustos 1993
Thesis: Lumped Parameter Analysis of Powder Injection Molding
Tez Danışmanı: Prof. Dr. Daeyong Lee

Lisans, Makine Mühendisliği, Boğaziçi Üniversitesi, İstanbul, Türkiye, Temmuz 1991
Mezuniyet Tezi: Effects of Processing Parameters on the Tensile Properties of Injection Molded Polypropylene and High Density Polyethylene
Tez Danışman: Prof. Dr. Sabri Altıntaş


Meslek İçi Eğitim:

e-Matrix Web Based Engineering and Product Data Management, Matrix One Inc., Haziran 2000

DFSS Generation III Tools, General Electric Corporate R&D, Aralık 1999

Fluid Sealing Technology, Georgia Institute of Technology, Kasım 1999

Technical Writing, Thornton Communications Inc., Temmuz 1999

Project Leadership, PCI Global Inc., Haziran 1999

Effective Presentation, General Electric Power Systems, Nisan 1999

DFSS Training, General Electric Corporate R&D, Ekim 1998

Interviewer Training Program, General Electric Corporate R&D, Ağustos 1998

Turbine University, General Electric Power Systems, mezuniyet - Aralık 1996

Çalıştığı Kuruluşlar :

2004- Doç.Dr. Sabancı Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi / Mekatronik

2002-2003 Başkan Yardımcısı ve Yönetim Kurulu Üyesi, Kazak-Türk Yenilenebilir Enerji Kaynakları Araştırma Merkezi

2001-2003 Enerji Sistemleri Bölüm Başkanı, Y. Doç.Dr., Gebze Yüksek Teknoloji Enstitüsü, Mühendislik Fakültesi

2001-2001 Advanced Seals Araştırma Ekibi Başkanı(Team Leader), Engineering Mechanics Laboratory, General Electric R&D Center

1998-2001 Proje Yöneticisi (Project Manager), Engineering Mechanics Laboratory, General Electric R&D Center

1992-1998 Sözleşmeli Araştırmacı (Contract Research Engineer), Engineering Mechanics Laboratory, General Electric R&D Center

1991-1998 Araştırma Görevlisi, Mechanical, Aerospace, & Nuclear Engineering, Rensselaer Polytechnic Institute, USA

Yayınlar :

Article
Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk (2013) "Modeling and control of a variable speed variable pitch angle prototype wind turbine", Mathematical and Computational Applications, Vol.18, No.3, 408-420
Çetinsoy, Ertuğrul and Dikyar, Serhat and Hançer, Cevdet and Öner, Kaan Taha and Sırımoğlu, Efe and Ünel, Mustafa and Akşit, Mahmut Faruk (2012) "Design and construction of a novel quad tilt-wing UAV", Mechatronics (Sl), Vol.22, No.6, 723-745 (SCI)
Coşkun, Mustafa Bulut and Aksoy, Serdar and Akşit, Mahmut Faruk (2012) "Friction and wear characteristics of Haynes 25, 188, and 214 superalloys against Hastelloy X up to 540 °C", Tribology Letters, Vol.45, No.3, 497-503 (SCI)
Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Gülez, Kayhan and Kandemir, İlyas (2012) "Mathematical modeling and vertical flight control of a tilt-wing UAV", Turkish Journal of Electrical Engineering & Computer Sciences, Vol.20, No.1, 149-157 (SCI)
Akşit, Mahmut Faruk (2011) "Wind turbine manufacturing infrastructure in Turkey", The Energy Report, Vol.2, No.15, 36-43
Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan (2011) "Design and development of a tilt-wing UAV", Turkish Journal of Electrical Engineering and Computer Sciences, Vol.19, No.5, 733-741 (SCI)
Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpiççi, Hüsnü (2010) "Effect of R600a on tribological behavior of sintered steel under starved lubrication", Tribology International (Sp. Iss. SI), Vol.43, No.5-6, 1054-1058 (SCI)
Akşit, Mahmut Faruk (2010) "Seeking design solutions through decoupling problems – a global engineering example ", ME Today: A Publication for Early Career Engineers, Vol.11
Doğu, Yahya and Akşit, Mahmut Faruk (2006) "Brush seal temperature distribution analysis", ASME Journal of Engineering for Gas Turbines and Power, Vol.128, No.3, 599-609 (SCI)
Doğu, Yahya and Akşit, Mahmut Faruk (2006) "Effects of geometry on brush seal pressure and flow fields - Part I: Front plate configurations", Journal of Turbomachinery, Vol.128, No.2, 367-378 (SCI)
Doğu, Yahya and Akşit, Mahmut Faruk (2006) "Effects of geometry on brush seal pressure and flow fields - Part II: Backing plate configurations", Journal of turbomachinery, Vol.128, No.2, 379-389 (SCI)
Papers in Conference Proceedings
Evren, Sanem and Ünel, Mustafa and Adak, Ömer Kemal and Erbatur, Kemalettin and Akşit, Mahmut Faruk, "Modeling and simulation of a horizontal axis wind turbine using S4WT", International Conference on Renewable Energy Research and Applications (ICRERA), Nagasaki, Japan: International Journal of Renewable Energy Research (IJRER), November 2012
Evren, Sanem and Ünel, Mustafa and Adak, Ömer Kemal and Erbatur, Kemalettin and Akşit, Mahmut Faruk, "Prototip bir rüzgar türbininin S4WT ortamında modellenmesi, denetimi ve benzetimi", Otomatik Kontrol Ulusal Toplantısı 2012 (TOK'12), Niğde, Türkiye: Niğde Üniversitesi, October 2012
Aksoy, Serdar and Coşkun, Mustafa Bulut and Akşit, Mahmut Faruk, "A fully coupled 3D finite element analysis for a bump-type compliant foil bearing", The ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), New York, NY, USA: ASME (The American Society of Mechanical Engineers) 2012
Coşkun, Mustafa Bulut and Aksoy, Serdar and Başaran, Necdet and Akşit, Mahmut Faruk, "Friction and wear characteristics of H25, H188, H214 against Hastelloy X", The ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), New York, NY, USA: ASME (The American Society of Mechanical Engineers) 2012
Akşit, Mahmut Faruk and Makaracı, Murat, "An overview of wind turbine manufacturing experience in Turkey", International 100% Renewable Energy Conference and Exhibition (IRENEC 2011), Istanbul: Marmara University, October 2011
Çevik, Gülnihal and Akşit, Mahmut Faruk and Şabanoviç, Asif, "Piezoelectric wind power harnessing – an overview", 10th International Conference on Sustainable Energy Technologies (SET2011), Ankara: Atilim University, September 2011
Dogan, Hassan and Akşit, Mahmut Faruk, "Aerodynamic performance sensitivity analysis of blade design for a 100 kW HAWT", 10th International Conference on Sustainable Energy Technologies (SET2011), Ankara: Atilim University, September 2011
Coşkun, Mustafa Bulut and Akşit, Mahmut Faruk, "A brief overview on high temperature friction and wear", STLE/ASME International Joint Tribology Conference, 2010 (IJTC2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers) 2011, 275-278
Aksoy, Serdar and Akşit, Mahmut Faruk and Doğu, Yahya, "A simple fem model for foil bearings under differential pressure", STLE/ASME International Joint Tribology Conference, 2010 (IJTC2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers), October 2010, 163-166
Coşkun, Mustafa Bulut and Aksoy, Serdar and Akşit, Mahmut Faruk, "Ultra high temperature linear reciprocating tribometer", ASME/STLE International Joint Tribology Conference 2010 (JTC 2010), New York, NY, USA: ASME (American Society Of Mechanical Engineers), October 2010
Aksoy, Serdar and Akşit, Mahmut Faruk, "Evaluation of pressure-stiffness coupling in brush seals", 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Reston, VA: AIAA (The American Institute of Aeronautics and Astronautics), July 2010
Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk, "Effect of shear heat on hydrodynamic lift of brush seals in oil sealing", STLE 65th STLE Annual Meeting & Exhibition, Park Ridge, IL, USA: STLE (The Society of Tribologists and Lubrication Engineers), May 2010
Dal, Mehmet and Kaya, Alaattin Metin and Akşit, Mahmut Faruk and Yiğit, S. Kadri and Kandemir, İlyas and Yüksel, Ebubekir, "A hardware test setup for grid connected and island operation of micro hydro power generation systems", IEEE Energy Conference & Exhibition (ENERGYCON 2010), USA: IEEE (Institute of Electrical and Electronics Engineers) 2010
Aksoy, Serdar and Akcan, Caner and Akşit, Mahmut Faruk, "Leakage performance of a novel turbomachinery shaft seal", The World Congress on Power and Energy Engineering (WCPEE 09), Cairo, Egypt: INFOMESR (The International Foundation for Modern Education and Scientific Research), October 2009
Aksoy, Serdar and Akşit, Mahmut Faruk and Duran, Ertuğrul Tolga, "Brush seal performance measurement system", ASME/STLE International Joint Tribology Conference (IJTC 2009), New York, USA: ASME (American Society of Mechanical Engineers), October 2009
Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Ayken, Taylan and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İ. and Gülez, K., "Yeni bir insansız hava aracının (SUAVİ) prototip üretimi ve algılayıcı-eyleyici entegrasyonu", Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye: Yıldız Teknik Üniversitesi, October 2009
Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Ayken, Taylan and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İ. and Gülez, K., "Döner-kanat mekanizmasına sahip yeni bir insansız hava aracının (SUAVİ) modellenmesi ve kontrolü", Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye: Yıldız Teknik Üniversitesi, October 2009
Akşit, Mahmut Faruk and Kızıl, Hüseyin and Efeoğlu, İhsan and Sariibrahimoğlu, Kemal, "Wear performance of titanium and niobium added MOS2 coatings under isobutane exposure", ASME/STLE International Joint Tribology Conference (IJTC 2009), New York, USA: ASME (American Society of Mechanical Engineers) 2009, 265-267
Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpicci, Hüsnü, "Tribological behavior of sintered steel under starved lubrication in R600A environment", 2nd International Conference on Advanced Tribology, iCAT 2008, Singapore: iCAT 2008 Organising Committee, December 2008, 189-191
Akşit, Mahmut Faruk, "3-D analysis of high density brush stiffness with friction-pressure coupling ", VI. Türkiye Abaqus Kullanıcılar Toplantısı - TAKT 2008 , İstanbul: A-Z İleri Mühendislik Ltd., November 2008, 317-322
Baran, Eray Abdurrahman and Hançer, Cevdet and Çalıkoğlu, Egemen and Duman, Emre and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk, "İnsansız hava araçları için test düzeneği tasarımı ve üretimi", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008, 82-83
Çetinsoy, Ertuğrul and Öner, Kaan Taha and Kandemir, İlyas and Akşit, Mahmut Faruk and Ünel, Mustafa and Gülez, Kayhan, "Yeni bir insansız hava aracının (SUAVi) mekanik ve aerodinamik tasarımı", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008, 890-896
Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan, "Dynamic model and control of a new quadrotor unmanned aerial vehicle with tilt-wing mechanism", ICCARV 2008 : "International Conference on Control, Automation, Robotics and Vision", Paris, France: WASET (World Academy of Science, Engineering and Technology), November 2008, 58-63
Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Kandemir, İlyas and Akşit, Mahmut Faruk and Gülez, Kayhan, "Yeni bir insansız hava aracının (SUAVi) dikey uçuş kipi için dinamik modeli ve yörünge kontrolü", Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul: İstanbul Teknik Üniversitesi, November 2008
Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Birol, Feriha S., "A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication", Farhat, Z.N. and Alfantazi, Akram (eds.), The 47th Annual Conference of Metallurgists, COM 2008, Montréal, Québec, Canada: Canadian Institute of Mining, Metallurgy and Petroleum, August 2008, 71-78
Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk, "A study of brush seal oil pressure profile including temperature-viscosity effects", 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Reston, VA, USA: AIAA (American Institute of Aeronautics and Astronautics), July 2008
Akcan, Caner and Akşit, Mahmut Faruk and Aksoy, Serdar and Yüksel, Ebubekir, "Response surface modeling of a small crossflow hydro turbine rotor", International Conference on Small Hydropower, Hidroenergia 2008: "On the Crossroads", Brussels, Belgium : ESHA (European Small Hydropower Association) 2008
Akşit, Mahmut Faruk and Çetinsoy, Ertuğrul and Kandemir, İIyas, "A study of brush seal oil lift through long bearing analysis", STLE/ASME International Joint Tribology Conference, New York: ASME, October 2006
Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk and Doğu, Yahya, "Effect of shear heat on hydrodynamic lift of brush seals in oil sealing", 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Reston, VA: AIAA, July 2006
Akşit, Mahmut Faruk and Kandemir, İlyas and Doğu, Yahya and Kızıl, Hüseyin, "An investigation of pressure stiffness coupling in brush seals", Eleventh Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery, Monterey, CA: ISROMAC, February 2006
Bhate, Nitin and Thermos, Anthony C. and Akşit, Mahmut Faruk and Demiroğlu, Mehmet and Kizil, Huseyin, "Non-metallic brush seals for gas turbine bearings", ASME Turbo Expo 2004:Power for Land, Sea, and Air, New York / USA: American Society of Mechanical Engineers, July 2004
Yeşilyurt, Serhat and Göktuğ, Gökhan and Akşit, Mahmut Faruk, "Modeling and simulation of micro-optical switches for dynamic and static loading", IEEE Conference on Industrial Technology, ICIT 03, Maribor, SLOVENIA: IEEE, December 2003, 293-297
Volumes Edited / Special Issues
Akşit, Mahmut Faruk, Proceedings for INGAS2007 2nd International Symposium and Exhibition on Natural Gas Operations , Istanbul: IGDAS, April 2007
Akşit, Mahmut Faruk and Doğu, Yahya, INGAS2005 uluslararası doğalgaz işletmeciliği ve teknik eğitim sempozyumu bildiriler kitabı, ISTANBUL: IGDAS, November 2005
SU Öncesi Yayınları:

Journal Papers : "Analysis of Hydrodynamic Lift for Oil Brush Seals," Submitted to AIAA J. Prop. and Power, 2004 “Advanced Seals for Industrial Turbine Applications: Design Approach and Static Seal Development,” AIAA J. Prop. and Power, 18, 1254-1259, 2002 “Advanced Seals for Industrial Turbine Applications: Dynamic Seal Development,” AIAA J. Prop. and Power, 18, 1260-1266, 2002 “Wear of Brush Seals: Background and New Modeling Approach,” STLE Tribology Transactions, 41, 368-374, 1998 “A Lumped Parameter Analysis of Powder Injection Molding,” Int. J. Powder Metallurgy, 31, 351-363, 1995 Additionally: Published 21 Conference Papers Editted 1 Book Holds 54 Patents