E-mail : eozlusabanciuniv.edu
Personal web page
09/2004-06/2008 Sabanci University, Industrial Engineering Ph.D. Program
10/2001-07/2003 Istanbul Technical University Mechanical Engineering, Manufacturing Master Degree Program
10/1997-07/2001 Istanbul Technical University, Mechanical Engineering (Design and Manufacturing Division)
Work Experience :
February 2009- Working at Machining R&D Ltd. as a General Manager. Maxima serves industry in order to apply
scientific based machining approaches. The services include (www.maxima.com.tr): - Consultancy on metal cutting operations, - Solution partner for high-speed
machining, - Development and sale of virtual
machining software, - Manufacturing of highly
complicated parts, - Education on the metal cutting
February 2009- Working as a part time faculty at Sabanci
Lecturer of two classes, - Introduction to
Manufacturing Systems (sophomore) - Integrated
Manufacturing Systems (senior)
Areas of Interest :
Multi-dimensional chatter vibrations and stability in machining operations, particularly in turning, boring and 5-axis milling; analytical process modeling for turning, milling, and broaching operations; friction in metal cutting; broach tool design and optimization; high strain rate deformation of metals.
|Özlü, Emre and Molinari, Alain and Budak, Erhan (2010) "Two-zone analytical contact model applied to orthogonal cutting
", Machining Science and Technology, Vol.14, No.3, 323-343 (SCI)|
|Özlü, Emre and Budak, Erhan and Molinari, A. (2009) "Analytical and experimental investigation of rake contact and friction behavior in metal cutting", International Journal of Machine Tools and Manufacture, Vol.49, No.11, 865-875 (SCI)|
|Papers in Conference Proceedings|
|Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan, "An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015|
|Baytok, Esma and Özlü, Emre and Budak, Erhan, "Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Üniversitesi, October 2014|
|Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan, "Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 129-138|
|Özlü, Emre and Budak, Erhan, "Process modeling of orthogonal cutting with hone radiused tools
", 12th CIRP Conference on Modeling and Machining Operations, San Sebastian, Spain: CIRP (International Academy for Production Engineering) 2009|
|Özlü, Emre and Budak, Erhan, "Analytical stability models for turning and boring operations", 2nd International Conference on High Speed Cutting,, June 2006|
|Özlü, Emre and Budak, Erhan, "Analytical prediction of stability limit in turning operations", CIRP International Workshop on Modeling of Machining Operations,, May 2006, 99-106|
|Özlü, Emre and Budak, Erhan, "Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi", TİMAK Kongresi,, April 2006|
Before SU Publications:
● Ozlu E., Budak E., and Molinari A., 2010, Two-zone analytical contact model applied to orthogonal cutting, Machining Science and Technology: An International Journal, 14/3, 323-343.
● Ozlu E., Budak E., and Molinari A., 2009, Analytical and experimental investigation of rake contact and friction behavior in metal cutting, International Journal of Machine Tools and Manufacture (49/11), 865-875.
●Ozlu, E., Budak E., 2008, Development of a Thermomechanical Cutting Process Model for Machining Process Simulations, Annals of the CIRP, (57), 97-100.
●Ozlu, E., Budak, E., 2007, Comparison of One Dimensional Oriented Transfer Function Stability Model vs. Multi Dimensional Stability Model in Turning Operations , International Journal of Machine Tools&Manufacture, (47), 1875-1883.
●Ozlu, E., Budak, E., 2007, Analytical Modeling of Chatter Stability in Turning and Boring Operations: A Multi-Dimensional Approach, Annals of the CIRP, (56), 401-404.
●Ozlu, E., Budak, E., 2007 Analytical Modeling of Chatter Stability in Turning and Boring Operations Part I: Model Development, Trans. ASME Journal of Manufacturing Science and Technology, (129), 733-739.
●Ozlu, E., Budak, E., 2007, Analytical Modeling of Chatter Stability in Turning and Boring Operations Part II: Experimental Verification, Trans. ASME Journal of Manufacturing Science and Technology, (129), 726-732.
●Ozlu, E., Zhe, J.,Chandra, S., Cheng J., Wu X., 2006, Feasibility Study of a Smart Motion Generator Utilizing Electromagnetic Microactuator Arrays, Smart Materials and Structures, (15), 1-10.